[Isocops] IBEX Orbit #517 ATS Approval (7 – 16 Feb 21)

Weaver, Carol Carol.Weaver at unh.edu
Thu Jan 28 17:03:52 EST 2021


Hi all,


Note: Angle at orbit 517 perigee after the apogee sun precession maneuver: 4.073 deg

I have looked at the orbit 517 ATS files,
IBEX_2021_038_o0517a_BUS_v001.scr, IBEX_2021_038_o0517a_INST_v001.scr
and I approve.

The only constraint violations in

IBEX_2021_038_o0517a_BUS_v001.ccvr, IBEX_2021_038_o0517a_INST_v001.ccvr
are from the removal of the

ACT_SetSpinPulseProtectEnable Enable

commands (2) and errors for transmissions being longer than 5400 seconds (2); the violations are expected.

The PL commands in

IBEX_2021_038_o0517a_INST_v001.scr

match those in the v002 STF,

IBEX_2021_038_o0517a_v002.stf.

Ascending and descending command sequences are consistent with each other, 15 Re ascending, the apogee maneuver time and 15 Re descending as determined from the OEF,

IBEX_2021_038_o0517a_BUS_v001.oef,

and as verified with ibex_orbit.

The ground station command sequences are correct and the timing and bit rates match those in the contacts file,

IBEX_Orbit517_Contacts.txt,

for all contacts (4).

We are not doing battery cell balancing this orbit.

The inertial maneuver at perigee of orbit 516 left us pointing in safe directions for the orbit 517 arc A ascending and descending sequences:


ibex_rotate -o -u 0.76273,-0.589271,-0.266465 -w ibex-sun -t 2021/02:07:19:48:44

Quaternion    +0.000000,+0.000000,+0.000000,+0.000000

 points axis  +1.000000,+0.000000,+0.000000

 towards ECI  +0.762730,-0.589271,-0.266465

 which is     R.A. +322.311 Decl. -15.454

 missing      R.A. +321.412 Decl. -15.152 (ibex-sun)

 error is     R.A.   +0.899 Decl.  +0.302

 for a total  0.918 deg


ibex_rotate -o -u 0.76273,-0.589271,-0.266465 -w ibex-sun -t 2021/02:11:19:41:57

Quaternion    +0.000000,+0.000000,+0.000000,+0.000000

 points axis  +1.000000,+0.000000,+0.000000

 towards ECI  +0.762730,-0.589271,-0.266465

 which is     R.A. +322.311 Decl. -15.454

 missing      R.A. +325.435 Decl. -13.803 (ibex-sun)

 error is     R.A.   +3.124 Decl.  +1.651

 for a total  3.444 deg

The sun precession maneuver at apogee leaves us pointing in safe directions at the time of the maneuver and for the arc B ascending and descending sequences:


ibex_rotate -o -r +325.506 -d -13.778 -w ibex-sun -t 2021/02:11:21:28:43

Quaternion    +0.000000,+0.000000,+0.000000,+0.000000

 points axis  +1.000000,+0.000000,+0.000000

 towards ECI  +0.800470,-0.550025,-0.238161

 which is     R.A. +325.506 Decl. -13.778

 missing      R.A. +325.506 Decl. -13.778 (ibex-sun)

 error is     R.A.   +0.000 Decl.  +0.000

 for a total  0.000 deg


ibex_rotate -o -r +325.506 -d -13.778 -w ibex-sun -t 2021/02:11:23:00:11

Quaternion    +0.000000,+0.000000,+0.000000,+0.000000

 points axis  +1.000000,+0.000000,+0.000000

 towards ECI  +0.800470,-0.550025,-0.238161

 which is     R.A. +325.506 Decl. -13.778

 missing      R.A. +325.568 Decl. -13.756 (ibex-sun)

 error is     R.A.   +0.062 Decl.  +0.022

 for a total  0.064 deg


ibex_rotate -o -r +325.506 -d -13.778 -w ibex-sun -t 2021/02:16:00:58:25

Quaternion    +0.000000,+0.000000,+0.000000,+0.000000

 points axis  +1.000000,+0.000000,+0.000000

 towards ECI  +0.800470,-0.550025,-0.238161

 which is     R.A. +325.506 Decl. -13.778

 missing      R.A. +329.447 Decl. -12.414 (ibex-sun)

 error is     R.A.   +3.941 Decl.  +1.364

 for a total  4.073 deg

The inertial precession maneuver at perigee leaves us pointing in safe directions at the time of the maneuver and at orbit 518 apogee:


ibex_rotate -o -u 0.855404,-0.471118,-0.215247 -w ibex-sun -t 2021/02:11:23:00:11

Quaternion    +0.000000,+0.000000,+0.000000,+0.000000

 points axis  +1.000000,+0.000000,+0.000000

 towards ECI  +0.855404,-0.471118,-0.215247

 which is     R.A. +331.156 Decl. -12.430

 missing      R.A. +325.568 Decl. -13.756 (ibex-sun)

 error is     R.A.   +5.588 Decl.  +1.326

 for a total  5.602 deg


ibex_rotate -o -u 0.855404,-0.471118,-0.215247 -w ibex-sun -t 2021/02:16:00:58:25

Quaternion    +0.000000,+0.000000,+0.000000,+0.000000

 points axis  +1.000000,+0.000000,+0.000000

 towards ECI  +0.855404,-0.471118,-0.215247

 which is     R.A. +331.156 Decl. -12.430

 missing      R.A. +329.447 Decl. -12.414 (ibex-sun)

 error is     R.A.   +1.709 Decl.  +0.016

 for a total  1.669 deg

There is no overlap with orbit 516 commands by manual inspection or by checking at

http://ibex.unh.edu/cgi-bin/ats.cgi<https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fibex.unh.edu%2Fcgi-bin%2Fats.cgi&data=04%7C01%7Ccarol.weaver%40unh.edu%7Ca251f36feabe41f6d05a08d8bd6d555f%7Cd6241893512d46dc8d2bbe47e25f5666%7C0%7C0%7C637467625586513054%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=bfDo8cW0Tgz5NmO5WW4R0xh6fmcD3t5%2BezM8BpFPYZI%3D&reserved=0>.

Command Approval Checklist is attached.




--
Carol Weaver
University of New Hampshire
503.902.8492

From: Perry, Timothy E [US] (SP) <Timothy.Perry at ngc.com>
Date: Thursday, 2021-January-21 at 12:44
To: Weaver, Carol <Carol.Weaver at unh.edu>, Chubin, Eric [US] (SP) <Eric.Chubin at ngc.com>, Heirtzler, David <David.Heirtzler at unh.edu>, IBEX at applieddefense.info <IBEX at applieddefense.info>, IBEXOPS at gmail.com <IBEXOPS at gmail.com>, isocops at lists.sr.unh.edu <isocops at lists.sr.unh.edu>, fair-play at comcast.net <fair-play at comcast.net>, kwfairchild at gmail.com <kwfairchild at gmail.com>, angoldconsulting at earthlink.net <angoldconsulting at earthlink.net>, paul.janzen at umontana.edu <paul.janzen at umontana.edu>, Perry, Timothy E [US] (SP) <Timothy.Perry at ngc.com>, Tyler, Ryan S [US] (SP) <Ryan.Tyler at ngc.com>, Wesley, Sheral R [US] (SP) <Sheral.Wesley at ngc.com>, Wynn, Reese [US] (SP) <Reese.Wynn at ngc.com>
Subject: IBEX Orbit #517 ATS Approval (7 – 16 Feb 21)
Caution - External Email

All,
   Attached are the planning files for Orbit #517
Please respond to this thread with comments and approvals.
Approvals are required by COB on 28 January 2021

Please note the following:

  1.  I generated 3 separate ATS files BUS, INST and a complete file. The BUS and INST will be the files to be uplinked. The complete ATS, I used as a sanity check to see how the commands lined up. Since we are in a new phase of ATS generation. IF you have any ideas of doing this differently, let me know.


  1.  The 3 ATS files have been changed to word files and encrypted. I will send out another email with the password. The files that have been transferred via MFT have not been encrypted and are still text files.


  1.  I moved the 2 House Keeping commands from the INST ATS to the BUS ATS. I commented out the 2 commands in the INST ATS. If for some reason we were unable to uplink the INST Commands for this orbit, we would have been in the wrong spacecraft state for executing the maneuver commands.



  1.  Apogee Sun Maneuver - 2021/02:11:21:13:43


  1.  No Battery Balancing this orbit


  1.  # Orbit# 515 Master Timer Reset - 2021/01:29:02:15:00



  1.  Command Load Constraint Violation Report (CCVR)
The 2 IBX-CLC-006 Soft constraint violations are acceptable. The reason for the violations is that the 2 contacts are separated by 1 hour.
IBEX,AUWA01,ADD,02/16/21,047,13:00:00,02/16/21,047,14:30:00,LAHO 160K IBEX-2 Orbit# 517 Star Tracker Dump/Tracking Contact 14 Per Asc
IBEX,AUWA01,ADD,02/16/21,047,15:30:00,02/16/21,047,16:30:00,LAHO 160K IBEX-2 Orbit# 517 SSR_Dump/Tracking Contact 14.5 Asc
==========================
HARD CONSTRAINT VIOLATIONS
==========================
NO VIOLATIONS.

==========================
SOFT CONSTRAINT VIOLATIONS
==========================
IBX-CLC-006: Planned transmission at 2021/02/16 12:58:00 UTC - 2021/02/16
             14:32:00 UTC exceeds the maximum contiguous transmission time of
             5400 seconds
IBX-CLC-006: Planned transmission at 2021/02/16 15:28:00 UTC - 2021/02/16
             16:32:00 UTC is preceded by one or more additional transmissions
             which, when combined, exceed the maximum transmission time of 5400
             seconds within a 18000-second window (total planned transmission
             time this window is 9480.000 seconds)
IBX-CLC-016: No command to enable spin pulse protection was found after
             transition to science mode at 2021/02/07 17:18:48 UTC
IBX-CLC-016: No command to enable spin pulse protection was found after
             transition to science mode at 2021/02/11 22:30:11 UTC

==============
OTHER MESSAGES
==============
NO MESSAGES.


Timothy E.Perry
CRS IBEX OCO-2
Mission Operations
timothy.perry at ngc.com
Office (703) 406-5976
Cell (301) 606-1430

[cid:image001.png at 01D6F597.8BCDB770]


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20210128/c06b4e65/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 5049 bytes
Desc: image001.png
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20210128/c06b4e65/image001-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IBEX-Command-Approval-Checklist-Rev16_G_517_CEW.docx
Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
Size: 47041 bytes
Desc: IBEX-Command-Approval-Checklist-Rev16_G_517_CEW.docx
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20210128/c06b4e65/IBEX-Command-Approval-Checklist-Rev16_G_517_CEW-0001.docx>


More information about the Isocops mailing list