[Isocops] IBEX Orbit #510 ATS Approval (7 – 16 Dec 20)
Nigel Angold
angoldconsulting at earthlink.net
Fri Nov 20 10:55:22 EST 2020
Hi Tim. Moving the orbit 510 load to the perigee passes to accommodate the orbit 509 LGC is fine. But I am concerned about the constraint violation message due to the eclipse:
IBX-CLC-015: Battery charge falls below minimum from 2020/12/06 18:30:00 UTC -
2020/12/15 23:32:00 UTC. Lowest charge level is 0.000000
watt-minutes during this interval.
I am assuming that this violation is because of the eclipse. I am not sure why the duration is the length of the orbit.
Do you think this is an MPS problem?
FYI
2020/12/0618:30:00 UTC is the time of the @ECT_SetLongEclipseFlag FALSE command at the end of orbit 509.
And 2020/12/15 23:32:00 UTC is the time of the last command (@ECT_SetRelay stx,off) in orbit 510.
Thanks,
Nigel
> All,
> Attached are the planning files for Orbit #510
> Please respond to this thread with comments and approvals.
> Approvals are required by COB on 26 November 2020
>
> Please note the following:
> 1. Please note that I am moving out the date for sign off to the perigee passes. I plan to uplink the Orbit 509 LGC ATS during the apogee pass on Nov 22.
>
> 2. The Apogee pass had to be changed. With the new ephemeris the original view period disappeared
> IBEX,USHI01,DELETE,12/12/20,347,02:30:00,12/12/20,347,03:05:00,LAHO 2K IBEX-2 Orbit# 510 Apogee Tracking Contact 42re Desc
> IBEX,USHI01,ADD,12/13/20,348,00:30:00,12/13/20,348,01:05:00,LAHO 2K IBEX-2 Orbit# 510 Apogee Tracking Contact 42re Desc
>
> I generated 3 separate ATS files BUS, INST and a complete file. The BUS and INST will be the files to be uplinked. The complete ATS, I used as a sanity check to see how the commands lined up. Since we are in a new phase of ATS generation. IF you have any ideas of doing this differently, let me know.
>
> The 3 ATS files have been changed to word files and encrypted. I will send out another email with the password. The files that have been transferred via MFT have not been encrypted and are still text files.
>
> I moved the 2 House Keeping commands from the INST ATS to the BUS ATS. I commented out the 2 commands in the INST ATS. If for some reason we were unable to uplink the INST Commands for this orbit, we would have been in the wrong spacecraft state for executing the maneuver commands.
>
> 6. Eclipse – Eclipse Duration 2020-12-15T12:37:55.730Z,PenumbraEntry,orbit:510 - 2020-12-15T14:00:41.598Z,PenumbraExit,orbit:510
> Long eclipse flag 2020/12:15:10:45:00 True - 2020/12:15:14:10:00 False
>
> 7. Orbit# 510 Reset Master Timer - 2020/11:28:00:15:00
>
> 8. Command Load Constraint Violation Report (CCVR)
> IBEX_2020_341_o0510a_v001.ccvr
> # Input files: 1
> # IBEX_2020_341_o0510a_v001.scr
>
> ==========================
> HARD CONSTRAINT VIOLATIONS
> ==========================
> NO VIOLATIONS.
>
> ==========================
> SOFT CONSTRAINT VIOLATIONS
> ==========================
> IBX-CLC-006: Planned transmission at 2020/12/15 10:28:00 UTC - 2020/12/15
> 12:02:00 UTC exceeds the maximum contiguous transmission time of
> 5400 seconds
> The reason for this violation is that we add 2 minutes before and after the scheduled time. So, the additional 4 minutes creates the violation.
> IBEX,USAK01,ADD,12/15/20,350,10:30:00,12/15/20,350,12:00:00,LAHO 64K IBEX-2 Orbit# 510 Pre-Eclipse Monitor Contact 14 Desc
>
> IBX-CLC-015: Battery charge falls below minimum from 2020/12/06 18:30:00 UTC -
> 2020/12/15 23:32:00 UTC. Lowest charge level is 0.000000
> watt-minutes during this interval.
> I am assuming that this violation is because of the eclipse. I am not sure why the duration is the length of the orbit.
>
> IBX-CLC-016: No command to enable spin pulse protection was found after
> transition to science mode at 2020/12/07 01:46:26 UTC
> IBX-CLC-016: No command to enable spin pulse protection was found after
> transition to science mode at 2020/12/12 02:37:37 UTC
>
> ==============
> OTHER MESSAGES
> ==============
> NO MESSAGES.
>
>
>
>
>
>
> Timothy E.Perry
> CRS IBEX OCO-2
> Mission Operations
> timothy.perry at ngc.com <mailto:timothy.perry at ngc.com>
> Office (703) 406-5976
> Cell (301) 606-1430
>
> <image001.png>
>
>
> <IBEX_Orbit510_Contacts.txt><IBEX_2020_341_o0510a_BUS_v001.docx><IBEX_2020_341_o0510a_v001.docx><IBEX_2020_341_o0510a_INST_v001.docx><IBEX_2020_341_o0510a_v001.ccvr><IBEX_2020_341_o0510a_INST_v001.ccvr><IBEX_2020_341_o0510a_BUS_v001.ccvr><IBEX_2020_341_o0510a_BUS_v001.oef><IBEX_2020_341_o0510a_INST_v001.oef>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20201120/07475e4e/attachment.html>
More information about the Isocops
mailing list