[Isocops] IBEX Orbit #486 ATS Approval ( 02 - 11 May 2020 )

[Perry, Timothy E [US] (IS)]

With all the files being sent out, I missed the contacts file. Here ya go...

Timothy E.Perry
CRS IBEX OCO-2
Mission Operations
timothy.perry at ngc.com
Office (703) 406-5976
Cell (301) 606-1430

[cid:image001.png at 01D542D6.6047A400]


From: Perry, Timothy E [US] (IS)
Sent: Thursday, April 16, 2020 3:10 PM
To: carol.weaver at unh.edu; Chubin, Eric [US] (IS) <Eric.Chubin at ngc.com>; David Heirtzler <David.Heirtzler at unh.edu>; IBEX FDG <IBEX at applieddefense.info>; IBEXOPS <IBEXOPS at gmail.com>; ISOC <isocops at lists.sr.unh.edu>; Ken Fairchild <fair-play at comcast.net>; Ken Fairchild (kwfairchild at gmail.com) <kwfairchild at gmail.com>; Nigel Angold <nigel.angold at nasa.gov>; Nigel Angold <angoldconsulting at earthlink.net>; Paul Janzen <paul.janzen at umontana.edu>; Perry, Timothy E [US] (IS) <Timothy.Perry at ngc.com>; Tyler, Ryan S [US] (IS) <Ryan.Tyler at ngc.com>; Wesley, Sheral R [US] (IS) <Sheral.Wesley at ngc.com>; Wynn, Reese [US] (IS) <Reese.Wynn at ngc.com>
Subject: IBEX Orbit #486 ATS Approval ( 02 - 11 May 2020 )

All,
   Attached are the planning files for Orbit #486
Please respond to this thread with comments and approvals.
Approvals are required by COB on 18 April 2020

Please note the following:

  1.  I generated 3 separate ATS files BUS, INST and a complete file. The BUS and INST will be the files to be uplinked. The complete ATS, I used as a sanity check to see how the commands lined up. Since we are in a new phase of ATS generation. IF you have any ideas of doing this differently, let me know.


  1.  The 3 ATS files have been changed to word docx files and encrypted. I will send out another email with the password. The files that have been transferred via MFT have not been encrypted and are still text files.



  1.  I moved the 2 House Keeping  commands from the INST ATS to the BUS ATS. I commented out the 2 commands in the INST ATS. If for some reason we were unable to uplink the INST Commands for this orbit, we would have been in the wrong spacecraft state for executing the maneuver commands.



  1.  Master Timer Command for Orbit #484
 # Orbit# 484 Reset Master Timer
  @EMR_StrobeMReset $TIME=2020/04:23:05:45:00


5.       Battery Balancing

# Orbit 486 Battery Balancing

# 2020-05-10T17:12:28.526Z,Perigee,orbit:486

  @ECT_SetLongEclipseFlag TRUE $TIME=2020/05:10:17:00:00

  @ECT_SetLongEclipseFlag FALSE $TIME=2020/05:10:18:30:00



6.       Command Load Constraint Violation Report (CCVR)
IBEX_2020_122_o0486a_v001.ccvr

==========================
HARD CONSTRAINT VIOLATIONS
==========================
NO VIOLATIONS.

==========================
SOFT CONSTRAINT VIOLATIONS
==========================
IBX-CLC-016: No command to enable spin pulse protection was found after
             transition to science mode at 2020/05/02 06:02:54 UTC
IBX-CLC-016: No command to enable spin pulse protection was found after
             transition to science mode at 2020/05/05 23:00:57 UTC

==============
OTHER MESSAGES
==============
NO MESSAGES.




Timothy E.Perry
CRS IBEX OCO-2
Mission Operations
timothy.perry at ngc.com<mailto:timothy.perry at ngc.com>
Office (703) 406-5976
Cell (301) 606-1430

[cid:image001.png at 01D542D6.6047A400]


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20200417/92feefa5/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 5047 bytes
Desc: image001.png
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20200417/92feefa5/image001.png>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: IBEX_Orbit486_Contacts.txt
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20200417/92feefa5/IBEX_Orbit486_Contacts.txt>