With all the files being sent out, I missed the contacts file. Here ya go…
Timothy E.Perry
CRS IBEX OCO-2
Mission Operations
timothy.perry@ngc.com
Office (703) 406-5976
Cell (301) 606-1430
From: Perry, Timothy E [US] (IS)
Sent: Thursday, April 16, 2020 3:10 PM
To: carol.weaver@unh.edu; Chubin, Eric [US] (IS) <Eric.Chubin@ngc.com>; David Heirtzler <David.Heirtzler@unh.edu>; IBEX FDG <IBEX@applieddefense.info>; IBEXOPS <IBEXOPS@gmail.com>; ISOC <isocops@lists.sr.unh.edu>; Ken Fairchild <fair-play@comcast.net>;
Ken Fairchild (kwfairchild@gmail.com) <kwfairchild@gmail.com>; Nigel Angold <nigel.angold@nasa.gov>; Nigel Angold <angoldconsulting@earthlink.net>; Paul Janzen <paul.janzen@umontana.edu>; Perry, Timothy E [US] (IS) <Timothy.Perry@ngc.com>; Tyler, Ryan S [US]
(IS) <Ryan.Tyler@ngc.com>; Wesley, Sheral R [US] (IS) <Sheral.Wesley@ngc.com>; Wynn, Reese [US] (IS) <Reese.Wynn@ngc.com>
Subject: IBEX Orbit #486 ATS Approval ( 02 - 11 May 2020 )
All,
Attached are the planning files for Orbit #486
Please respond to this thread with comments and approvals.
Approvals are required by COB on 18 April 2020
Please note the following:
# Orbit# 484 Reset Master Timer
@EMR_StrobeMReset $TIME=2020/04:23:05:45:00
5.
Battery Balancing
# Orbit 486 Battery Balancing
# 2020-05-10T17:12:28.526Z,Perigee,orbit:486
@ECT_SetLongEclipseFlag TRUE $TIME=2020/05:10:17:00:00
@ECT_SetLongEclipseFlag FALSE $TIME=2020/05:10:18:30:00
6.
Command Load Constraint Violation Report (CCVR)
IBEX_2020_122_o0486a_v001.ccvr
==========================
HARD CONSTRAINT VIOLATIONS
==========================
NO VIOLATIONS.
==========================
SOFT CONSTRAINT VIOLATIONS
==========================
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2020/05/02 06:02:54 UTC
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2020/05/05 23:00:57 UTC
==============
OTHER MESSAGES
==============
NO MESSAGES.
Timothy E.Perry
CRS IBEX OCO-2
Mission Operations
Office (703) 406-5976
Cell (301) 606-1430