All,
The AUWA01 contact was failed due to no command capability at the station. Station techs were on site and working the issue. I did see SOH TLM throughout the pass. The spacecraft
is nominal, and the inertial maneuver was successful.
The orbit 621 ATS was uplinked on the USHI02 contact today@19:00gmt. The master timer was reset. We completed more maestro1 testing today with command success. We were able
to send single commands to the spacecraft and verify them in real time.
Tasks accomplished:
Reset Mater Timer
CAR 138 Orbit 621 ATS upload
IBEX_2023_255_o0621a_v001 103 commands
Results from the Inertial Maneuver:
Q1 0.59182600 ActNor.EstInrToBdy[0]
Q2 -0.26709900 ActNor.EstInrToBdy[1]
Q3 -0.75920700 ActNor.EstInrToBdy[2]
Q4 0.04478100 ActNor.EstInrToBdy[3]
GPS sec 1377720038 ActNor.EstTime
UTC time
09/02/2023 20:00:24 output
MPS Diff
0.785 deg
MPS Cmd Vector X -0.92457800
MPS Cmd Vector Y 0.353044000
MPS Cmd Vector Z 0.143234000
CSS Angle TLM 0.32145
CSS Sun-Pointing Angle 0.6429
29 Aug 23@03:00:00
CSS Angle TLM 0.15949
CSS Sun-Pointing Angle 0.31898
02 Sept 23@03:00:00
Pre-Burn
Thruster 1 10704 29 Aug 23@03:00:00
Thruster 2 10464
Thruster 3 12912
Thruster 4 13152
Post-Burn
Thruster 1 11008 02 Sept 23@03:00:00
Thruster 2 10736
Thruster 3 13216
Thruster 4 13488
Number of Pulses
Thruster 1 304
Thruster 2 272
Thruster 3 304
Thruster 4 336
Thruster Pairs
Thruster 1 & 2 576
Thruster 3 & 4 640
Timothy E.Perry
CRS IBEX OCO-2
Mission Operations
Office (703) 406-5976
Cell (301) 606-1430