All,
Attached are the planning files for Orbit #603.
Please respond to this thread with comments and approvals.
Approvals are required by 0200, 03 April 2023.
All,
We will be deleting the timed commands for orbit 603 & 604 tonight and up-linking a version 2 Orbit 603 ATS with apogee and perigee sun maneuvers. We are experiencing a star tracker issue that
prohibits us from safely performing an inertial maneuver. Here are the changes to note for the new version 2 ATS for orbit 603.
Tonight’s contact:
IBEX,USHI02,ADD,04/03/23,093,08:00:00,04/03/23,093,09:00:00,,LAHO 2K IBEX-3 Orbit# 603 SC Replace ATS/Blind Acq Contact 40re Asc
This will be blind acquisition. The transmitter off command for this contact is in the ATS. A separate transmitter off command will be uplinked at AOS just in case I am not able to up-link the
ATS.
The apogee Descending commands:
Original descending commands started to execute @2023/04:04:10:01:48 and now they will be executing @2023/04:04:19:59:40. So, it is important to complete ATS replacement prior to the execution of
these commands @2023/04:04:10:01:48.
The apogee contact has been moved:
IBEX,USHI01,DELETE,04/04/23,094,15:00:00,04/04/23,094,15:35:00,,LAHO 2K IBEX-3 Orbit# 603 Apogee Tracking Contact 43re APO
IBEX,USHI01,ADD,04/05/23,095,13:00:00,04/05/23,095,13:35:00,,LAHO 2K IBEX-3 Orbit# 603 Apogee Tracking Contact 43re Desc
The original Inertial maneuver executed @ 2023/04:04:11:57:46 and the new sun maneuver executes @2023/04:04:21:55:38. So the apogee contact had to be moved.
The SSR contact at perigee has been extended to dump both orbits 602 and 603 data.
IBEX,USHI01,DELETE,04/09/23,099,03:00:00,04/09/23,099,04:00:00,,LAHO 160K IBEX-3 Orbit# 603 SSR_Dump/Tracking Contact 13re Desc
IBEX,USHI01,ADD,04/09/23,099,03:00:00,04/09/23,099,04:30:00,,LAHO 160K IBEX-3 Orbit# 603 SSR_Dump/Tracking Contact 13re Desc
All Contact changes have been confirmed at the time of the ATS generation.
Please note the following:
3.
Battery Balancing this orbit
Begin
04/09/2023 10:00:00– End 04/09/2023 11:30:00
4.
Command Load Constraint Violation Report (CCVR)
IBEX_2023_090_o0603a_v002.ccvr
# Input files:
1
# IBEX_2023_090_o0603a_v002.scr
==========================
HARD CONSTRAINT VIOLATIONS
==========================
NO VIOLATIONS.
==========================
SOFT CONSTRAINT VIOLATIONS
==========================
IBX-CLC-006: Planned transmission at 2023/04/09 02:58:00 UTC - 2023/04/09
04:32:00 UTC exceeds the maximum contiguous transmission time of
5400 seconds
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2023/03/31 16:53:53 UTC
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2023/04/04 23:10:44 UTC
==============
OTHER MESSAGES
==============
NO MESSAGES.