All,

I have looked at

IBEX_2023_018_o0595a_v002.scr

and I approve.

The only difference between the v001 and v002 ATS is the absence of the battery cell balancing commands in v002.

I've attached an updated version of the Command Approval Checklist.

Everything in the v001 approval email stands except we aren't doing battery cell balancing.

Ken

On Sun, Jan 8, 2023 at 10:23 AM Perry, Timothy E [US] (SP) <Timothy.Perry@ngc.com> wrote:

All,

   Attached is the version 2 ATS for Orbit #595. The battery balancing commands have been removed.

      Tim

 

From: Perry, Timothy E [US] (SP)
Sent: Thursday, January 5, 2023 3:22 PM
To: Carol Weaver <carol.weaver@unh.edu>; Chubin, Eric [US] (SP) <Eric.Chubin@ngc.com>; David Heirtzler <David.Heirtzler@unh.edu>; IBEX FDG Group <ADS-IBEX@l3harris.com>; IBEXOPS <IBEXOPS@gmail.com>; ISOC <isocops@lists.sr.unh.edu>; Ken Fairchild <fair-play@comcast.net>; Ken Fairchild (kwfairchild@gmail.com) <kwfairchild@gmail.com>; Ken Fairchild UNH <Ken.Fairchild@unh.edu>; Nigel Angold <angoldconsulting@earthlink.net>; Paul Janzen <Paul.Janzen@mso.umt.edu>; Perry, Timothy E [US] (SP) <Timothy.Perry@ngc.com>; Tyler, Ryan S [US] (SP) <Ryan.Tyler@ngc.com>; Wesley, Sheral R [US] (SP) <Sheral.Wesley@ngc.com>; Wynn, Reese [US] (SP) <Reese.Wynn@ngc.com>
Subject: IBEX Orbit #595 ATS Approval (19 - 27 Jan 2023)

 

All, 

   Attached are the planning files for Orbit #595. Please respond to this thread with comments and approvals.   

Approvals are required by COB, 08 Jan 2023 

  

Please note the following: 

  1. Apogee Sun Maneuver – 2023/01/23 00:44:54 

 

2.       Battery Balancing this orbit 

Begin 2023/01/27 10:00:00– End 2023/01/27 11:30:00 

 

3.       Command Load Constraint Violation Report (CCVR) 

IBEX_2023_018_o0595a_v001.ccvr 

# Input files:        

#   IBEX_2023_018_o0595a_v001.scr 

 

========================== 

HARD CONSTRAINT VIOLATIONS 

========================== 

NO VIOLATIONS. 

 

========================== 

SOFT CONSTRAINT VIOLATIONS 

========================== 

IBX-CLC-016: No command to enable spin pulse protection was found after 

             transition to science mode at 2023/01/19 00:21:39 UTC 

IBX-CLC-016: No command to enable spin pulse protection was found after 

             transition to science mode at 2023/01/23 02:00:00 UTC 

 

============== 

OTHER MESSAGES 

============== 

NO MESSAGES.