All,
Attached are the planning files for Orbit #503
Please respond to this thread with comments and approvals.
Approvals are required by COB on 19 September 2020
Please note the following:
# 2020-10-13T12:27:12.723Z,Perigee,orbit:503
Begin - 2020/10:13:12:00:00 – End - 2020/10:13:13:30:00
5.
Orbit# 501 Reset Master Timer - 2020/09:25:13:15:00
The commands have been commented out because I am still waiting on the schedule confirmation from APL. I will create a separate ATS for the APL contact once the contact has been confirmed.
Just a reminder for the APL contact. We will start off at 2k D\L, after 5 minutes we switch to 320k D\L. Then 5 minutes later we start the SSR Dump With Dump New command
7.
Command Load Constraint Violation Report (CCVR)
IBEX_2020_278_o0503a_v001.ccvr
# Input files: 1
# IBEX_2020_278_o0503a_v001.scr
==========================
HARD CONSTRAINT VIOLATIONS
==========================
NO VIOLATIONS.
==========================
SOFT CONSTRAINT VIOLATIONS
==========================
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2020/10/04 05:36:29 UTC
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2020/10/08 12:12:32 UTC
==============
OTHER MESSAGES
==============
NO MESSAGES.
Timothy E.Perry
CRS IBEX OCO-2
Mission Operations
timothy.perry@ngc.com
Office (703) 406-5976
Cell (301) 606-1430