I approve IBEX_2020_023_o0475a_v001.scr

However, the IBX-CLC-006 violation messages triggered by the proximity of SSC contacts at the end of orbit 474 and beginning of orbit 475 have incorrect information about Tx on times. This needs to be investigated. The actual Tx operations are ok although the Tx temp will need to be monitored closely during the second contact.

Thanks,
Nigel

All,
Attached are the planning files for Orbit #475
Please respond to this thread with comments and approvals.  
Approvals are required by COB on 13 Jan 2020. 
 
Please note the following:
1.       No Battery Balancing
 
2.       Command Load Constraint Violation Report (CCVR)
 
               The 2 IBX-CLC-006 constraint violations are acceptable. This is because  2 contacts have been scheduled within in a 5 hour period.
IBEX,AUWA01,ADD,01/23/20,023,19:00:00,01/23/20,023,20:00:00,,LAHO 160K Orbit# 474 SSR_Dump/Tracking Contact 13.5re Asc
IBEX,USAK01,ADD,01/23/20,023,23:30:00,01/24/20,024,00:30:00,LAHO 160K IBEX-3 Orbit# 475 Lo Normal Sweep 16re ASC
 
IBEX_2020_023_o0475a_v001_.ccvr
 
==========================
HARD CONSTRAINT VIOLATIONS
==========================
NO VIOLATIONS.
 
==========================
SOFT CONSTRAINT VIOLATIONS
==========================
IBX-CLC-006: Planned transmission at 2020/01/23 20:00:00 UTC - 2020/01/23
             23:28:00 UTC exceeds the maximum contiguous transmission time of
             5400 seconds
IBX-CLC-006: Planned transmission at 2020/01/23 23:28:00 UTC - 2020/01/24
             00:32:00 UTC is preceded by one or more additional transmissions
             which, when combined, exceed the maximum transmission time of 5400
             seconds within a 18000-second window (total planned transmission
             time this window is 16320.000 seconds)
IBX-CLC-016: No command to enable spin pulse protection was found after
             transition to science mode at 2020/01/23 20:01:23 UTC
IBX-CLC-016: No command to enable spin pulse protection was found after
             transition to science mode at 2020/01/27 09:45:36 UTC
 
==============
OTHER MESSAGES
==============
NO MESSAGES.
 
 
 
 
 
Timothy E.Perry
CRS IBEX OCO-2
Mission Operations
timothy.perry@ngc.com
Office (703) 406-5976
Cell (301) 606-1430
 
<image001.png>
 
 
<IBEX_2020_023_o0475a_v001_.ccvr><IBEX_Orbit475_Contacts.txt><IBEX-Command-Approval-Checklist-Rev16_F_475_TEP.docx><IBEX_2020_023_o0475a_v001.oef><IBEX_2020_023_o0475a_v001.txt>