All,
I have looked at the orbit 455 ATS,
IBEX_2019_206_o0455a_v001.scr,
and I approve.
The only constraint violations in
IBEX_2019_206_o0455a_v001.ccvr
are from the removal of the
ACT_SetSpinPulseProtectEnable Enable
commands (2); the violations are expected.
The PL commands in the v001 ATS match those in the v002 STF,
IBEX_2019_206_o0455a_v002.stf.
Ascending and descending command sequences are consistent with each other, 15 Re ascending, the apogee maneuver time and 15 Re descending as determined from the OEF,
IBEX_2019_206_o0455a_v001.oef,
and as verified with ibex_orbit.
There is one star tracker outage. The outage starts 1+ hours before perigee and runs for about 7 hours. No despinning should be required due to this outage.
The ground station command sequences are correct and the timing and bit rates match those in the contacts file,
IBEX_Orbit455_Contacts.txt,
for all contacts (3).
We are not doing battery cell balancing this orbit; we'll do it again in the next orbit.
The inertial maneuver at perigee of orbit 454 left us pointing in safe directions for the orbit 455 arc A ascending and descending sequences:
ibex_rotate -o -u -0.493473,0.801565,0.337605 -w ibex-sun -t 2019/07:25:18:59:27
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI -0.493473,+0.801565,+0.337605
which is R.A. +121.618 Decl. +19.731
missing R.A. +124.527 Decl. +19.630 (ibex-sun)
error is R.A. +2.909 Decl. +0.101
for a total 2.741 deg
ibex_rotate -o -u -0.493473,0.801565,0.337605 -w ibex-sun -t 2019/07:29:09:22:43
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI -0.493473,+0.801565,+0.337605
which is R.A. +121.618 Decl. +19.731
missing R.A. +128.050 Decl. +18.845 (ibex-sun)
error is R.A. +6.432 Decl. +0.886
for a total 6.135 deg
The inertial maneuver at apogee leaves us pointing in safe directions at the time of the maneuver and for arc B ascending and descending sequences:
ibex_rotate -o -u -0.556844,0.766065,0.321043 -w ibex-sun -t 2019/07:29:11:05:51
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI -0.556844,+0.766065,+0.321043
which is R.A. +126.013 Decl. +18.726
missing R.A. +128.121 Decl. +18.829 (ibex-sun)
error is R.A. +2.108 Decl. +0.103
for a total 1.999 deg
ibex_rotate -o -u -0.556844,0.766065,0.321043 -w ibex-sun -t 2019/07:29:12:40:57
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI -0.556844,+0.766065,+0.321043
which is R.A. +126.013 Decl. +18.726
missing R.A. +128.187 Decl. +18.815 (ibex-sun)
error is R.A. +2.174 Decl. +0.089
for a total 2.060 deg
ibex_rotate -o -u -0.556844,0.766065,0.321043 -w ibex-sun -t 2019/08:02:22:50:24
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI -0.556844,+0.766065,+0.321043
which is R.A. +126.013 Decl. +18.726
missing R.A. +132.576 Decl. +17.727 (ibex-sun)
error is R.A. +6.563 Decl. +0.999
for a total 6.313 deg
The inertial maneuver at perigee leaves us pointing in safe directions at the time of the maneuver and at orbit 456 apogee:
ibex_rotate -o -u -0.619179,0.724018,0.304 -w ibex-sun -t 2019/08:03:01:29:39
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI -0.619179,+0.724018,+0.304000
which is R.A. +130.537 Decl. +17.698
missing R.A. +132.679 Decl. +17.695 (ibex-sun)
error is R.A. +2.142 Decl. +0.003
for a total 2.041 deg
ibex_rotate -o -u -0.619179,0.724018,0.304 -w ibex-sun -t 2019-08-07T20:41:06.254Z
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI -0.619179,+0.724018,+0.304000
which is R.A. +130.537 Decl. +17.698
missing R.A. +137.209 Decl. +16.415 (ibex-sun)
error is R.A. +6.672 Decl. +1.283
for a total 6.506 deg
No Lo O-mode.
There is no overlap with orbit 454 commands by manual inspection or by checking at
http://ibex.unh.edu/cgi-bin/ats.cgi.
Command Approval Checklist is attached.
Ken
On July 11, 2019 at 12:44 PM "Perry, Timothy" <Timothy.Perry@ngc.com> wrote:
All,
Attached are the planning files for Orbit #455
Please respond to this thread with comments and approvals.
Approvals are required by COB 15 July 2019.
Please note the following:
1. No Battery Balancing
2. Command Load Constraint Violation Report (CCVR)
IBEX_2019_206_o0455a_v001.scr
==========================
HARD CONSTRAINT VIOLATIONS
==========================
NO VIOLATIONS.
==========================
SOFT CONSTRAINT VIOLATIONS
==========================
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2019/07/25 17:07:33 UTC
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2019/07/29 12:10:57 UTC
==============
OTHER MESSAGES
==============
NO MESSAGES.
Timothy E.Perry
CRS IBEX OCO-2
Mission Operations
tim.perry@orbitalatk.com
Office (703) 406-5976
Cell (301) 606-1430
![]()
Notice: This e-mail is intended solely for use of the individual or entity to which it is addressed and may contain information that is proprietary, privileged and/or exempt from disclosure under applicable law. If the reader is not the intended recipient or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. This communication may also contain data subject to U.S. export laws. If so, data subject to the International Traffic in Arms Regulation cannot be disseminated, distributed, transferred, or copied, whether incorporated or in its original form, to foreign nationals residing in the U.S. or abroad, absent the express prior approval of the U.S. Department of State. Data subject to the Export Administration Act may not be disseminated, distributed, transferred or copied contrary to U. S. Department of Commerce regulations. If you have received this communication in error, please notify the sender by reply e-mail and destroy the e-mail message and any physical copies made of the communication.
Thank you.
*********************