All,
The ISOC received these files:
1348 IBEX_APL18_2019_188_11_22_cortex1_VCID1.tlm
0 IBEX_APL18_2019_188_11_22_cortex2_VCID1.tlm
1147148 IBEX_APL18_2019_188_11_22_cortex2_VCID0.tlm
1148496 IBEX_APL18_2019_188_11_22_cortex1_VCID0.tlm
31122624 IBEX_APL18_2019_188_11_22_cortex2_VCID2.tlm
35894544 IBEX_APL18_2019_188_11_22_cortex2_tlm.raw.0
31122624 IBEX_APL18_2019_188_11_22_cortex1_VCID2.tlm
35886456 IBEX_APL18_2019_188_11_22_cortex1_tlm.raw.0
The block range of all VCID2 files (split and raw) is the same:
70000-93087
The software reported no missing blocks. Initial orbit processing has been completed and no problems were observed.
Ken
On July 8, 2019 at 10:29 AM "Garcia, Tony" <Tony.Garcia@jhuapl.edu> wrote:
All,
Saturday’s pass was successful and all telemetry files have been transferred.
Regards,
Tony
From: Perry, Timothy [mailto:Timothy.Perry@ngc.com]
Sent: Monday, June 17, 2019 2:14 PM
To: Garcia, Tony; Dove, William; Colin Joyce; Chubin, Eric; Siddique, Fazle E.; IBEX-FDG; IBEXOPS; ISOC; John Ferreira; EXT Scherrer, John; Ken Fairchild; Lockwood, Robert; Marissa Intelisano; Nathan Schwadron (nschwadron@guero.sr.unh.edu); Nigel Angold; Stephen Lutz; Wesley, Sheral
Subject: RE: IBEX Orbit# 451 APL-18 SSR_Dump Contact Request
Tony,
Normally we come up at 2k and then switch to 320k for the ssr dump (VC2 data). For this pass we would like to come up at 320k and then start the SSR dump 5 minutes later. Below is the command sequence for the pass.
IBEX, APL-18,ADD,07/07/19,188,11:35:00,07/07/19,188,12:00:00,,12re-Descending Perigee 320K IBEX Orbit# 452 SSR_Dump/Tracking Contact
# Orbit# 452 PERIGEE: APL-18 SSR_Dump/Tracking Contact (320k)
SetRelay stx,on $TIME=2019/07:07:11:33:00
SetDownlink320K $TIME=2019/07:07:11:33:02
SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2019/07:07:11:33:04
SetBilevelOutputControlReg COHERENT,ON $TIME=2019/07:07:11:33:06
SSR_DUMP_NEW $TIME=2019/07:07:11:36:00
SetRelay stx,off $TIME=2019/07:07:12:00:00
Tim
Timothy E.Perry
CRS IBEX OCO-2
Mission Operations
Office (703) 406-5976
Cell (301) 606-1430
![]()
From: Garcia, Tony [mailto:Tony.Garcia@jhuapl.edu]
Sent: Monday, June 17, 2019 12:20 PM
To: Perry, Timothy <Timothy.Perry@ngc.com>; Dove, William <William.Dove@jhuapl.edu>; Colin Joyce <cjl46@wildcats.unh.edu>; Chubin, Eric <Eric.Chubin@ngc.com>; Siddique, Fazle E. <Fazle.Siddique@jhuapl.edu>; IBEX-FDG <IBEX.fdg@applieddefense.com>; IBEXOPS <IBEXOPS@gmail.com>; ISOC <isocops@lists.sr.unh.edu>; John Ferreira <jferreira@applieddefense.com>; EXT Scherrer, John <jscherrer@swri.edu>; Ken Fairchild <fair-play@comcast.net>; Lockwood, Robert <Robert.Lockwood@ngc.com>; Marissa Intelisano <mintelisano@applieddefense.com>; Nathan Schwadron (nschwadron@guero.sr.unh.edu) <nschwadron@guero.sr.unh.edu>; Nigel Angold <nigel.angold@nasa.gov>; Stephen Lutz <stephen.lutz@applieddefense.com>; Wesley, Sheral <Sheral.Wesley@ngc.com>
Subject: EXT :RE: IBEX Orbit# 451 APL-18 SSR_Dump Contact Request
Tim,
I have a pass already scheduled to start at 12:05:00Z. If you can shift your request a little, I have a gap between 10:45 to 12:00Z. Otherwise, the only free time I have for that day is from 15:00 to 18:00Z.
Regards,
Tony
From: Perry, Timothy [mailto:Timothy.Perry@ngc.com]
Sent: Monday, June 10, 2019 2:33 PM
To: Dove, William; Colin Joyce; Chubin, Eric; Siddique, Fazle E.; IBEX-FDG; IBEXOPS; ISOC; John Ferreira; EXT Scherrer, John; Ken Fairchild; Lockwood, Robert; Marissa Intelisano; Nathan Schwadron (nschwadron@guero.sr.unh.edu); Nigel Angold; Perry, Timothy; Stephen Lutz; Garcia, Tony; Wesley, Sheral
Subject: IBEX Orbit# 451 APL-18 SSR_Dump Contact Request
Please schedule the APL-18 Contact listed below
I am aware that we will only have downlink
IBEX, APL-18,ADD,07/07/19,188,11:40:00,07/07/19,188,12:40:00,,12re-Descending Perigee 2K-320K IBEX Orbit# 452 SSR_Dump/Tracking Contact
Timothy E.Perry
CRS IBEX OCO-2
Mission Operations
Office (703) 406-5976
Cell (301) 606-1430
![]()
Notice: This e-mail is intended solely for use of the individual or entity to which it is addressed and may contain information that is proprietary, privileged and/or exempt from disclosure under applicable law. If the reader is not the intended recipient or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. This communication may also contain data subject to U.S. export laws. If so, data subject to the International Traffic in Arms Regulation cannot be disseminated, distributed, transferred, or copied, whether incorporated or in its original form, to foreign nationals residing in the U.S. or abroad, absent the express prior approval of the U.S. Department of State. Data subject to the Export Administration Act may not be disseminated, distributed, transferred or copied contrary to U. S. Department of Commerce regulations. If you have received this communication in error, please notify the sender by reply e-mail and destroy the e-mail message and any physical copies made of the communication.
Thank you.
*********************
Notice: This e-mail is intended solely for use of the individual or entity to which it is addressed and may contain information that is proprietary, privileged and/or exempt from disclosure under applicable law. If the reader is not the intended recipient or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. This communication may also contain data subject to U.S. export laws. If so, data subject to the International Traffic in Arms Regulation cannot be disseminated, distributed, transferred, or copied, whether incorporated or in its original form, to foreign nationals residing in the U.S. or abroad, absent the express prior approval of the U.S. Department of State. Data subject to the Export Administration Act may not be disseminated, distributed, transferred or copied contrary to U. S. Department of Commerce regulations. If you have received this communication in error, please notify the sender by reply e-mail and destroy the e-mail message and any physical copies made of the communication.
Thank you.
*********************