All,
Attached are the planning files for Orbit #438.
Please respond to this thread with comments and approvals.
Approvals are required by COB on 9 Feb 2019.
Please note the following:
The second perigee pass for Orbit 437 transmitter
on commands start prior to the execution of the Orbit# 438 Ascending BUS Commands. Then the transmitter off command executes between the Orbit# 438 Ascending BUS Commands and the Orbit 438 Ascending Payload Commands. This should not be an issue since the timed
commands are sorted by time when they are uplinked to the spacecraft.
# Orbit # 437
SSR_Dump/Tracking Contact
@ECT_SetRelay
stx,on $TIME=2019/02:20:11:58:00
@FMI_SetDownlink160K $TIME=2019/02:20:11:58:02
@FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2019/02:20:11:58:04
@FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2019/02:20:11:58:06
# Orbit# 438 Ascending BUS Commands
@FCT_SetScState science $TIME=2019/02:20:12:12:29
@CEU_LO_SCIENCE_MODE NORMAL $TIME=2019/02:20:12:12:31
# Orbit # 437
SSR_Dump/Tracking Contact
@ECT_SetRelay
stx,off $TIME=2019/02:20:13:02:00
# Orbit# 438
Ascending Payload Commands
@CEU_MACRO_EXEC
ASCENDING_PL1 $TIME=2019/02:20:14:19:21
# 2019-03-01T06:41:01.615Z,Perigee,orbit:438
@ECT_SetLongEclipseFlag
TRUE $TIME=2019/03:01:06:00:00
@ECT_SetLongEclipseFlag FALSE $TIME=2019/03:01:07:30:00
# Input files:
1
#
IBEX_2019_051_o0438a_v001.scr
==========================
HARD CONSTRAINT VIOLATIONS
==========================
NO VIOLATIONS.
==========================
SOFT CONSTRAINT VIOLATIONS
==========================
IBX-CLC-016: No command
to enable spin pulse protection was found after
transition to science mode at 2019/02/20 12:12:29 UTC
IBX-CLC-016: No command
to enable spin pulse protection was found after
transition to science mode at 2019/02/24 15:36:27 UTC
==============
OTHER MESSAGES
==============
NO MESSAGES.
Timothy E. Perry
Mission Operations
CRS, IBEX, OCO-2 & TESS
RAPTOR Test Team
Office (703) 406-5976
Cell (301) 606-1430