All,
I have looked at the orbit 428 ATS,
IBEX_2018_325_o0428a_v001.scr,
and I approve.
The only constraint violations in
IBEX_2018_325_o0428a_v001_.ccvr
are from the removal of the
ACT_SetSpinPulseProtectEnable Enable
commands (2); the violations are expected.
The PL commands in the v001 ATS match those in the v002 STF,
IBEX_2018_325_o0428a_v002.stf.
Ascending and descending command sequences are consistent with each other, 15 Re ascending, the apogee maneuver time and 15 Re descending as determined from the OEF,
IBEX_2018_325_o0428a_v001.oef,
and as verified with ibex_orbit.
There is one star tracker outage. The outage starts 9+ hours after 15 Re ascending and runs for more than 1 1/2 days. Some despinning may be required due to this outage.
The ground station command sequences are correct and the timing and bit rates match those in the contacts file,
IBEX_Orbit428_Contacts.txt,
for all contacts (3).
We are not doing battery cell balancing this orbit; we'll do it again in the next orbit.
The inertial maneuver at perigee of orbit 427 left us pointing in safe directions for the orbit 428 arc A ascending and descending sequences:
ibex_rotate -o -u -0.559607,-0.756679,-0.338048 -w ibex-sun -t 2018/11:21:14:27:43
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI -0.559607,-0.756679,-0.338048
which is R.A. +233.515 Decl. -19.758
missing R.A. +236.768 Decl. -19.955 (ibex-sun)
error is R.A. +3.253 Decl. +0.197
for a total 3.066 deg
ibex_rotate -o -u -0.559607,-0.756679,-0.338048 -w ibex-sun -t 2018/11:25:04:10:00
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI -0.559607,-0.756679,-0.338048
which is R.A. +233.515 Decl. -19.758
missing R.A. +240.430 Decl. -20.674 (ibex-sun)
error is R.A. +6.915 Decl. +0.916
for a total 6.553 deg
The inertial precession maneuver at apogee leaves us pointing in safe directions at the time of the maneuver and for arc B ascending and descending sequences:
ibex_rotate -o -u -0.490666,-0.795325,-0.355955 -w ibex-sun -t 2018/11:25:05:53:08
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI -0.490666,-0.795325,-0.355955
which is R.A. +238.328 Decl. -20.852
missing R.A. +240.505 Decl. -20.686 (ibex-sun)
error is R.A. +2.177 Decl. +0.166
for a total 2.042 deg
ibex_rotate -o -u -0.490666,-0.795325,-0.355955 -w ibex-sun -t 2018/11:25:07:28:14
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI -0.490666,-0.795325,-0.355955
which is R.A. +238.328 Decl. -20.852
missing R.A. +240.574 Decl. -20.698 (ibex-sun)
error is R.A. +2.246 Decl. +0.154
for a total 2.106 deg
ibex_rotate -o -u -0.490666,-0.795325,-0.355955 -w ibex-sun -t 2018/11:29:16:11:39
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI -0.490666,-0.795325,-0.355955
which is R.A. +238.328 Decl. -20.852
missing R.A. +245.294 Decl. -21.469 (ibex-sun)
error is R.A. +6.966 Decl. +0.617
for a total 6.525 deg
The inertial maneuver at perigee leaves us pointing in safe directions at the time of the maneuver and at orbit 429 apogee:
ibex_rotate -o -u -0.420876,-0.828588,-0.369195 -w ibex-sun -t 2018/11:29:18:37:03
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI -0.420876,-0.828588,-0.369195
which is R.A. +243.072 Decl. -21.666
missing R.A. +245.409 Decl. -21.491 (ibex-sun)
error is R.A. +2.337 Decl. +0.175
for a total 2.180 deg
ibex_rotate -o -u -0.420876,-0.828588,-0.369195 -w ibex-sun -t 2018-12-04T14:33:57.654Z
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI -0.420876,-0.828588,-0.369195
which is R.A. +243.072 Decl. -21.666
missing R.A. +250.568 Decl. -22.241 (ibex-sun)
error is R.A. +7.496 Decl. +0.575
for a total 6.976 deg
No Lo O-mode.
There is no overlap with orbit 427 commands by manual inspection or by checking at
http://ibex.unh.edu/cgi-bin/ats.cgi.
Command Approval Checklist is attached.
Ken
On November 7, 2018 at 5:47 PM "Perry, Timothy" <Timothy.Perry@ngc.com> wrote:
All,
Attached are the planning files for Orbit #428.
Please respond to this thread with comments and approvals.
Approvals are required by COB 10 Nov 18.
Note the Following:
1. IBEX_2018_325_o0428a_v001_.ccvr
# Input files: 1
# IBEX_2018_325_o0428a_v001.scr
==========================
HARD CONSTRAINT VIOLATIONS
==========================
NO VIOLATIONS.
==========================
SOFT CONSTRAINT VIOLATIONS
==========================
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2018/11/21 12:44:44 UTC
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2018/11/25 06:58:14 UTC
==============
OTHER MESSAGES
==============
NO MESSAGES.
2. No Battery Balancing
Timothy E. Perry
CRS, IBEX, OCO-2 & TESS
Mission Operations
Tim.perry@ngc.com
Office (703) 406-5976
Cell (301) 606-1430
Corp Cell (571) 447-8977
![cid:image002.png@01D43627.CCEBFFF0]()
Notice: This e-mail is intended solely for use of the individual or entity to which it is addressed and may contain information that is proprietary, privileged and/or exempt from disclosure under applicable law. If the reader is not the intended recipient or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. This communication may also contain data subject to U.S. export laws. If so, data subject to the International Traffic in Arms Regulation cannot be disseminated, distributed, transferred, or copied, whether incorporated or in its original form, to foreign nationals residing in the U.S. or abroad, absent the express prior approval of the U.S. Department of State. Data subject to the Export Administration Act may not be disseminated, distributed, transferred or copied contrary to U. S. Department of Commerce regulations. If you have received this communication in error, please notify the sender by reply e-mail and destroy the e-mail message and any physical copies made of the communication.
Thank you.
*********************