All,
I have looked at the orbit 405 ATS,
IBEX_2018_115_o0405a_v001.scr,
and I approve.
The only constraint violations in
IBEX_2018_115_o0405a_v001_.ccvr
are from the removal of the
ACT_SetSpinPulseProtectEnable Enable
commands (2); the violations are expected.
The PL commands in the v001 ATS match those in the v002 STF,
IBEX_2018_115_o0405a_v002.stf.
Ascending and descending command sequences are consistent with each other, 15 Re ascending, the apogee maneuver time and 15 Re descending as determined from the OEF,
IBEX_2018_115_o0405a_v001.oef,
and as verified with ibex_orbit.
There is one star tracker outage. It starts 1+ days after apogee and runs for 2- days. Some despinning may be required due to this outage.
There are no moon in Lo FOV sessions.
The ground station command sequences are correct and the timing and bit rates match those in the contacts file,
IBEX_Orbit405_Contacts.txt,
for all contacts (3).
We are doing battery cell balancing this orbit and the balancing commands are correct and offset by enough time from other commands.
The inertial maneuver at perigee of orbit 404 left us pointing in safe directions for the orbit 405 arc A ascending and descending sequences:
ibex_rotate -o -u 0.83794,0.504361,0.208509 -w ibex-sun -t 2018/04:26:07:27:47
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI +0.837940,+0.504361,+0.208509
which is R.A. +31.044 Decl. +12.035
missing R.A. +33.456 Decl. +13.419 (ibex-sun)
error is R.A. +2.412 Decl. +1.384
for a total 2.729 deg
ibex_rotate -o -u 0.83794,0.504361,0.208509 -w ibex-sun -t 2018/04:29:20:52:25
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI +0.837940,+0.504361,+0.208509
which is R.A. +31.044 Decl. +12.035
missing R.A. +36.945 Decl. +14.582 (ibex-sun)
error is R.A. +5.901 Decl. +2.547
for a total 6.281 deg
The inertial precession maneuver at apogee leaves us pointing in safe directions at the time of the maneuver and for arc B ascending and descending sequences:
ibex_rotate -o -u 0.794147,0.561601,0.23224 -w ibex-sun -t 2018/04:29:22:35:33
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI +0.794147,+0.561601,+0.232240
which is R.A. +35.267 Decl. +13.429
missing R.A. +37.013 Decl. +14.605 (ibex-sun)
error is R.A. +1.746 Decl. +1.176
for a total 2.063 deg
ibex_rotate -o -u 0.794147,0.561601,0.23224 -w ibex-sun -t 2018/04:30:00:10:39
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI +0.794147,+0.561601,+0.232240
which is R.A. +35.267 Decl. +13.429
missing R.A. +37.077 Decl. +14.627 (ibex-sun)
error is R.A. +1.810 Decl. +1.198
for a total 2.125 deg
ibex_rotate -o -u 0.794147,0.561601,0.23224 -w ibex-sun -t 2018/05:04:08:51:23
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI +0.794147,+0.561601,+0.232240
which is R.A. +35.267 Decl. +13.429
missing R.A. +41.142 Decl. +15.944 (ibex-sun)
error is R.A. +5.875 Decl. +2.515
for a total 6.214 deg
The inertial maneuver at perigee leaves us pointing in safe directions at the time of the maneuver and at orbit 406 apogee:
ibex_rotate -o -u 0.745068,0.615608,0.256711 -w ibex-sun -t 2018/05:04:11:19:36
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI +0.745068,+0.615608,+0.256711
which is R.A. +39.565 Decl. +14.875
missing R.A. +41.235 Decl. +15.969 (ibex-sun)
error is R.A. +1.669 Decl. +1.094
for a total 1.946 deg
ibex_rotate -o -u 0.745068,0.615608,0.256711 -w ibex-sun -t 2018-05-09T09:13:48.297Z
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI +0.745068,+0.615608,+0.256711
which is R.A. +39.565 Decl. +14.875
missing R.A. +46.098 Decl. +17.331 (ibex-sun)
error is R.A. +6.533 Decl. +2.456
for a total 6.739 deg
No Lo O-mode.
There is no overlap with orbit 404 commands by manual inspection or by checking at
http://ibex.unh.edu/cgi-bin/ats.cgi.
Command Approval Checklist is attached.
Ken
On April 13, 2018 at 10:26 AM "Wesley, Sheral" <Sheral.Wesley@OrbitalATK.com> wrote:Guys,
Here are the planning files and ATS for Orbit# 405
Please respond to the email thread with your comments and approvals
Approvals are required before 15 Apr 18 @1800 UTC
Note the following
1. IBEX Hi Gain Test
Orbit# 405 APOGEE: IBEX_Hi Gain Test (3 May 18 0300-0715 UTC)
2. Battery Balancing
2018-05-04T20:19:37.793Z,Perigee,orbit:405
SetLongEclipseFlag TRUE $TIME=2018/05:04:19:00:00
SetLongEclipseFlag FALSE $TIME=2018/05:04:20:30:00
3. Command Load Constraint Violation Report
IBEX_2018_115_o0405a_v001.scr
==========================
HARD CONSTRAINT VIOLATIONS
==========================
NO VIOLATIONS.
==========================
SOFT CONSTRAINT VIOLATIONS
==========================
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2018/04/26 05:38:59 UTC
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2018/04/29 23:40:39 UTC
==============
OTHER MESSAGES
==============
NO MESSAGES.
Sheral R. Wesley
Sr Systems Engineer
IBEX, OCO2 Mission OPS
CRS/CYGNUS Mission Planning
Bldg. 2 Room 1337
Office (703) 406-5641
Cell (202) 236-0802
Notice: This e-mail is intended solely for use of the individual or entity to which it is addressed and may contain information that is proprietary, privileged and/or exempt from disclosure under applicable law. If the reader is not the intended recipient or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. This communication may also contain data subject to U.S. export laws. If so, data subject to the International Traffic in Arms Regulation cannot be disseminated, distributed, transferred, or copied, whether incorporated or in its original form, to foreign nationals residing in the U.S. or abroad, absent the express prior approval of the U.S. Department of State. Data subject to the Export Administration Act may not be disseminated, distributed, transferred or copied contrary to U. S. Department of Commerce regulations. If you have received this communication in error, please notify the sender by reply e-mail and destroy the e-mail message and any physical copies made of the communication.
Thank you.
*********************