28635564 IBEX_APL18_2017_291_08_09_cortex1_VCID2.tlm
4044 IBEX_APL18_2017_291_08_09_cortex1_VCID1.tlm
2344172 IBEX_APL18_2017_291_08_09_cortex1_VCID0.tlm
4044 IBEX_APL18_2017_291_08_09_cortex2_VCID1.tlm
2341476 IBEX_APL18_2017_291_08_09_cortex2_VCID0.tlm
72127436 IBEX_APL18_2017_291_08_09_cortex1_tlm.raw.0
28636912 IBEX_APL18_2017_291_08_09_cortex2_VCID2.tlm
72126088 IBEX_APL18_2017_291_08_09_cortex2_tlm.raw.0
280830 IBEX_APL18_2017_291_08_09_cortex1_dop1.raw.0.geosc
The block range of all VCID2 files (both split and raw) is the same:
6500-27743
The software reports no missing blocks. I've done the initial orbit processing and see no problems.
Ken
All,
This morning’s pass was successful with all telemetry and doppler files transferred.
Regards,
Tony
From: Wesley, Sheral [mailto:Sheral.Wesley@orbitalatk.com]
Sent: Thursday, October 12, 2017 9:31 AM
To: Dove, William; Colin Joyce; Chubin, Eric; Siddique, Fazle E.; IBEX-FDG; IBEXOPS; ISOC; John Ferreira; EXT Scherrer, John; Ken Fairchild; Lockwood, Robert; Marissa Intelisano; Nathan Schwadron (nschwadron@guero.sr.unh.edu); Nigel Angold; Perry, Timothy; Stephen Lutz; Garcia, Tony; Wesley, Sheral
Subject: APL-18 IBEX Orbit# 383 18 Oct 17 @0814 UTC
Here is the command sequence for the APL-18 Contact listed below
# IBEX,APL-18,ADD,10/18/17,291,08:14:00,10/18/17,291,09:14:00,,12re-Ascending Perigee 2K-320K IBEX Orbit# 383 SSR_Dump/Tracking Contact
Orbit# 383 PERIGEE: APL-18 SSR_Dump/Tracking Contact
SetRelay stx,on $TIME=2017/10:18:08:12:00
SetDownlink2K $TIME=2017/10:18:08:12:02
SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2017/10:18:08:12:04
SetBilevelOutputControlReg COHERENT,ON $TIME=2017/10:18:08:12:06
SetDownlink320K $TIME=2017/10:18:08:19:00
CEU_SSR_DUMP_NEW $TIME=2017/10:18:08:24:00
SetRelay stx,off $TIME=2017/10:18:09:16:00
Sheral R. Wesley
Sr Systems Engineer
IBEX , OCO2 Mission OPS
CRS/CYGNUS Mission Planning
Bldg. 2 Room 1337
Office (703) 406-5641
Cell (202) 236-0802
Notice: This e-mail is intended solely for use of the individual or entity to which it is addressed and may contain information that is proprietary, privileged and/or exempt from disclosure under applicable law. If the reader is not the intended recipient or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. This communication may also contain data subject to U.S. export laws. If so, data subject to the International Traffic in Arms Regulation cannot be disseminated, distributed, transferred, or copied, whether incorporated or in its original form, to foreign nationals residing in the U.S. or abroad, absent the express prior approval of the U.S. Department of State. Data subject to the Export Administration Act may not be disseminated, distributed, transferred or copied contrary to U. S. Department of Commerce regulations. If you have received this communication in error, please notify the sender by reply e-mail and destroy the e-mail message and any physical copies made of the communication.
Thank you.
*********************