Guys,
Here are the planning files and ATS for Orbit# 384.
Please respond to this email thread with your comments and approvals
Approvals are required before 6 Oct 17 @1200 UTC
Note the following:
1.
APL-18 SSR_Dump Contact (2-320k)
SetRelay stx,on $TIME=2017/10:27:03:58:00
SetDownlink2K $TIME=2017/10:27:03:58:02
Set_SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2017/10:27:03:58:04
SetBilevelOutputControlReg COHERENT,ON $TIME=2017/10:27:03:58:06
SetDownlink320K $TIME=2017/10:27:04:05:00
SSR_DUMP_NEW $TIME=2017/10:27:04:10:00
SetRelay stx,off $TIME=2017/10:27:05:02:00
2.
IBEX_Hi Gain Test
Orbit# 384 APOGEE: IBEX_Hi Gain Test (19 Oct 17 @10:19:19:30:36 - 10:19:23:45:41)
3.
Command Load Constraint Violation Report
IBEX_2017_291_o0384a_v001.scr
==========================
HARD CONSTRAINT VIOLATIONS
==========================
NO VIOLATIONS.
==========================
SOFT CONSTRAINT VIOLATIONS
==========================
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2017/10/18 15:41:33 UTC
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2017/10/22 11:56:19 UTC
==============
OTHER MESSAGES
==============
NO MESSAGES.
Sheral R. Wesley
Sr Systems Engineer
IBEX , OCO2 Mission OPS
CRS/CYGNUS Mission Planning
Bldg. 2 Room 1337
Office (703) 406-5641
Cell (202) 236-0802