[Isocops] IBEX Orbit #521 ATS Approval (15 - 25 Mar 21)

[Nigel Angold]

I approve IBEX_2021_074_o0521a_BUS_v001.scr and IBEX_2021_074_o0521a_INST_v001.scr.

Nigel

All,
   Attached are the planning files for Orbit #521
Please respond to this thread with comments and approvals.
Approvals are required by COB on 05 March 2021

Please note the following:

  1.  I generated 3 separate ATS files BUS, INST and a complete file. The BUS and INST will be the files to be uplinked. The complete ATS, I used as a sanity check to see how the commands lined up. Since we are in a new phase of ATS generation. IF you have any ideas of doing this differently, let me know.



  1.  The 3 ATS files have been changed to word files and encrypted. I will send out another email with the password. The files that have been transferred via MFT have not been encrypted and are still text files.



  1.  I moved the 2 House Keeping commands from the INST ATS to the BUS ATS. I commented out the 2 commands in the INST ATS. If for some reason we were unable to uplink the INST Commands for this orbit, we would have been in the wrong spacecraft state for executing the maneuver commands.
  2.  Battery Balancing this orbit

Begin 2021/03:24:23:30:00– End 2021/03:25:01:00:00

5.       # Orbit# 519 Reset Master Timer  - 2021/03:06:19:45:00


  1.  APL Contact 2021-03-24,083,22:00:00 - 2021-03-24,083,23:00:00

Just a reminder for the APL contact. We start off at 2k D\L, after 5 minutes we switch to 320k D\L, Then 5 minutes later we start the SSR Dump with Dump New command

7.       Command Load Constraint Violation Report (CCVR)
IBEX_2021_074_o0521a_v001.ccvr
# Input files:         1
#   IBEX_2021_074_o0521a_v001.scr

==========================
HARD CONSTRAINT VIOLATIONS
==========================
NO VIOLATIONS.

==========================
SOFT CONSTRAINT VIOLATIONS
==========================
IBX-CLC-016: No command to enable spin pulse protection was found after
             transition to science mode at 2021/03/15 22:57:28 UTC
IBX-CLC-016: No command to enable spin pulse protection was found after
             transition to science mode at 2021/03/19 22:20:54 UTC

==============
OTHER MESSAGES
==============
NO MESSAGES.


Timothy E.Perry
CRS IBEX OCO-2
Mission Operations
timothy.perry at ngc.com<mailto:timothy.perry at ngc.com>
Office (703) 406-5976
Cell (301) 606-1430

<image001.png>


<IBEX-Command-Approval-Checklist-Rev16_F_521_TEP.docx><IBEX_2021_074_o0521a_v001.docx><IBEX_2021_074_o0521a_INST_v001.docx><IBEX_2021_074_o0521a_BUS_v001.docx><IBEX_2021_074_o0521a_v001.ccvr><IBEX_2021_074_o0521a_INST_v001.ccvr><IBEX_2021_074_o0521a_BUS_v001.ccvr><IBEX_2021_074_o0521a_BUS_v001.oef><IBEX_2021_074_o0521a_INST_v001.oef><IBEX_Orbit521_Contacts.txt>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20210305/34f8ede3/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IBEX-Command-Approval-Checklist-Rev16g-o521-nga.ngpdf
Type: application/octet-stream
Size: 230858 bytes
Desc: IBEX-Command-Approval-Checklist-Rev16g-o521-nga.ngpdf
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20210305/34f8ede3/IBEX-Command-Approval-Checklist-Rev16g-o521-nga-0001.ngpdf>