[Isocops] [Not Virus Scanned] IBEX Orbit #519 ATS Approval (25 Feb – 06 Mar 21)

[Nigel Angold]

I approve  IBEX_2021_056_o0519a_BUS_v001.scr and IBEX_2021_056_o0519a_INST_v002.scr

Nigel


All,

   Attached are the planning files for Orbit #519

Please respond to this thread with comments and approvals.

Approvals are required by COB on 15 February 2021



Please note the following:

  1.  I generated 3 separate ATS files BUS, INST and a complete file. The BUS and INST will be the files to be uplinked. The complete ATS, I used as a sanity check to see how the commands lined up. Since we are in a new phase of ATS generation. IF you have any ideas of doing this differently, let me know.



  1.  The 3 ATS files have been changed to word files and encrypted. I will send out another email with the password. The files that have been transferred via MFT have not been encrypted and are still text files.



  1.  I moved the 2 House Keeping commands from the INST ATS to the BUS ATS. I commented out the 2 commands in the INST ATS. If for some reason we were unable to uplink the INST Commands for this orbit, we would have been in the wrong spacecraft state for executing the maneuver commands.



  1.  Apogee Sun Maneuver - 2021/03:02:01:41:18



  1.  Battery Balancing this orbit

Begin 2021/03:06:14:00:00– End 2021/03:06:15:30:00



6.       # Orbit# 517 Reset Master Timer  - 2021/02:16:16:15:00



7.       Command Load Constraint Violation Report (CCVR)

IBEX_2021_056_o0519a_v001.ccvr

# Input files:         1

#   IBEX_2021_056o0519a_v001.scr



==========================

HARD CONSTRAINT VIOLATIONS

==========================

NO VIOLATIONS.



==========================

SOFT CONSTRAINT VIOLATIONS

==========================

IBX-CLC-016: No command to enable spin pulse protection was found after

             transition to science mode at 2021/02/25 19:45:58 UTC

IBX-CLC-016: No command to enable spin pulse protection was found after

             transition to science mode at 2021/03/02 02:58:05 UTC



==============

OTHER MESSAGES

==============

NO MESSAGES





Timothy E.Perry

CRS IBEX OCO-2

Mission Operations

timothy.perry at ngc.com<mailto:timothy.perry at ngc.com>

Office (703) 406-5976

Cell (301) 606-1430



<image001.png>





<IBEX-Command-Approval-Checklist-Rev16_F_519_TEP.docx><IBEX_2021_056o0519a_INST_v001.docx><IBEX_2021_056o0519a_v001.docx><IBEX_2021_056_o0519a_BUS_v001.docx><IBEX_2021_056_o0519a_BUS_v001.ccvr><IBEX_2021_056_o0519a_v001.ccvr><IBEX_2021_056_o0519a_INST_v001.ccvr><IBEX_2021_056_o0519a_BUS_v001.oef><IBEX_2021_056_o0519a_INST_v001.oef><IBEX_Orbit519_Contacts.txt>
Please restrict discussions on this email list to non-ITAR sensitive topics.
______________________________________________
Isocops mailing list
Isocops at lists.sr.unh.edu<mailto:Isocops at lists.sr.unh.edu>
https://lists.sr.unh.edu/mailman/listinfo/isocops
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20210215/e6681f64/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IBEX-Command-Approval-Checklist-Rev16g-o519-nga.ngpdf
Type: application/octet-stream
Size: 231961 bytes
Desc: IBEX-Command-Approval-Checklist-Rev16g-o519-nga.ngpdf
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20210215/e6681f64/IBEX-Command-Approval-Checklist-Rev16g-o519-nga-0001.ngpdf>