[Isocops] [Not Virus Scanned] IBEX Orbit #527 ATS Approval (10 May – May 19, 2021)

[NIgel Angold]

I approve IBEX_2021_129_o0527a_BUS_v001.scr and 
IBEX_2021_129_o0527a_INST_v001.scr

Nigel
>
> All,
>
>    Attached are the planning files for Orbit #526. Please respond to 
> this thread with comments and approvals.
>
> Approvals are required by COB on 29 April 2021
>
> Please note the following:
>
>  1. I generated 3 separate ATS files BUS, INST and a complete file.
>     The BUS and INST will be the files to be uplinked. The complete
>     ATS, I used as a sanity check to see how the commands lined up.
>     Since we are in a new phase of ATS generation. IF you have any
>     ideas of doing this differently, let me know. 
>
>  2. The 3 ATS files have been changed to word files and encrypted. The
>     files that have been transferred via MFT have not been encrypted
>     and are still text files. 
>
>  3. I moved the 2 House Keeping commands from the INST ATS to the BUS
>     ATS. I commented out the 2 commands in the INST ATS. If for some
>     reason we were unable to uplink the INST Commands for this orbit,
>     we would have been in the wrong spacecraft state for executing the
>     maneuver commands. 
>
>  4. Battery Balancing this orbit
>
> Begin 2021/05:19:05:30:00– End 2021/05:19:07:00:00
>
> 5.# Orbit# 525 Reset Master Timer  - 2021/05:01:00:45:00
>
>  6. APL Contact 2021-05-10,04:00:00- 2021-05-10,05:00:00
>
> Just a reminder for the APL contact. We start off at 2k D\L, after 5 
> minutes we switch to 320k D\L, Then 5 minutes later we start the SSR 
> Dump with Dump New command
>
> 7.Command Load Constraint Violation Report (CCVR)
>
> IBEX_2021_129_o0527a_v001.ccvr
>
> Input files:         1
>
> # IBEX_2021_129_o0527a_v001.scr
>
> ==========================
>
> HARD CONSTRAINT VIOLATIONS
>
> ==========================
>
> NO VIOLATIONS.
>
> ==========================
>
> SOFT CONSTRAINT VIOLATIONS
>
> ==========================
>
> IBX-CLC-016: No command to enable spin pulse protection was found after
>
>              transition to science mode at 2021/05/09 23:47:49 UTC
>
> IBX-CLC-016: No command to enable spin pulse protection was found after
>
>              transition to science mode at 2021/05/14 03:47:59 UTC
>
> ==============
>
> OTHER MESSAGES
>
> ==============
>
> NO MESSAGES.
>
> Timothy E.Perry
>
> CRS IBEX OCO-2
>
> Mission Operations
>
> timothy.perry at ngc.com
>
> Office (703) 406-5976
>
> Cell (301) 606-1430
>
> cid:image001.png at 01D542D6.6047A400
>
>
>
> Please restrict discussions on this email list to non-ITAR sensitive topics.
> ______________________________________________
> Isocops mailing list
> Isocops at lists.sr.unh.edu
> https://lists.sr.unh.edu/mailman/listinfo/isocops

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20210429/6b9ca9c2/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 5125 bytes
Desc: not available
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20210429/6b9ca9c2/image-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IBEX-Command-Approval-Checklist-Rev16g-o527-nga.ngpdf
Type: application/pdf
Size: 235023 bytes
Desc: not available
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20210429/6b9ca9c2/IBEX-Command-Approval-Checklist-Rev16g-o527-nga-0001.ngpdf>