[Isocops] IBEX Orbit #493 ATS Approval ( 4 - 13 July 2020 )

[Nigel Angold]

I approve IBEX_2020_185_o0493a_BUS_v001.scr for uplink during the upcoming apogee contact: USHI01, LAHO 2K IBEX-1 Orbit# 490 Apogee Tracking Contact 43re Asc, 06/10/20 @ 15:00:00 UTC

I also approve IBEX_2020_185_o0493a_INST_v001.scr for uplink no earlier than the orbit 491 post-perigee contact: USAK01, LAHO 2K IBEX-1 Orbit# 492 Hi BkGnd Test End Contact 15re Asc, 06/25/20 @ 04:00:00 UTC

Nigel

> All,
>    Attached are the planning files for Orbit #493
> Please respond to this thread with comments and approvals.  
> Approvals are required by 14:00 on 10 June 2020
>  
> Please note the following:
> I generated 3 separate ATS files BUS, INST and a complete file. The BUS and INST will be the files to be uplinked. The complete ATS, I used as a sanity check to see how the commands lined up. Since we are in a new phase of ATS generation. IF you have any ideas of doing this differently, let me know.
>  
> The 3 ATS files have been changed to word  files and encrypted. I will send out another email with the password. The files that have been transferred via MFT have not been encrypted and are still text files.  
>  
> I moved the 2 House Keeping commands from the INST ATS to the BUS ATS. I commented out the 2 commands in the INST ATS. If for some reason we were unable to uplink the INST Commands for this orbit, we would have been in the wrong spacecraft state for executing the maneuver commands. 
>  
> Note the CEU Lo Science Mode is set to BACKGROUND
>  
> No Battery Balancing this orbit
>  
> Command Load Constraint Violation Report (CCVR)
> IBEX_2020_185_o0493a_v001.ccvr
>  
> ==========================
> HARD CONSTRAINT VIOLATIONS
> ==========================
> NO VIOLATIONS.
>  
> ==========================
> SOFT CONSTRAINT VIOLATIONS
> ==========================
> IBX-CLC-016: No command to enable spin pulse protection was found after
>              transition to science mode at 2020/07/04 01:30:36 UTC
> IBX-CLC-016: No command to enable spin pulse protection was found after
>              transition to science mode at 2020/07/07 22:05:25 UTC
>  
> ==============
> OTHER MESSAGES
> ==============
> NO MESSAGES.
>  
>  
>  
>  
>  
> Timothy E.Perry
> CRS IBEX OCO-2
> Mission Operations
> timothy.perry at ngc.com <mailto:timothy.perry at ngc.com>
> Office (703) 406-5976
> Cell (301) 606-1430
>  
> <image001.png>
>  
>  
> <IBEX-Command-Approval-Checklist-Rev16_F_493_TEP.docx><IBEX_2020_185_o0493a_v001.ccvr><IBEX_2020_185_o0493a_BUS_v001.ccvr><IBEX_2020_185_o0493a_INST_v001.ccvr><IBEX_2020_185_o0493a_v001.docx><IBEX_2020_185_o0493a_BUS_v001.docx><IBEX_2020_185_o0493a_INST_v001.docx><IBEX_2020_185_o0493a_INST_v001.oef><IBEX_2020_185_o0493a_BUS_v001.oef><IBEX_Orbit493_Contacts.txt>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20200609/77ebdd76/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IBEX-Command-Approval-Checklist-Rev16e-o493-nga.ngpdf
Type: application/octet-stream
Size: 152475 bytes
Desc: not available
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20200609/77ebdd76/IBEX-Command-Approval-Checklist-Rev16e-o493-nga-0001.ngpdf>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20200609/77ebdd76/attachment-0003.html>