[Isocops] IBEX Orbit #496 ATS Approval ( 31 July – 9 Aug 2020 )

[Nigel Angold]

I approve IBEX_2020_213_o0496a_BUS_v002.scr, IBEX_2020_213_o0496a_INST_v001.scr. Both can be uplinked this perigee life there’s room.

Thanks,
Nigel

> All,
>    Attached are the planning files for Orbit #496
> Please respond to this thread with comments and approvals.  
> Approvals are required by COB on 20 July 2020
>  
> Please note the following:
> I generated 3 separate ATS files BUS, INST and a complete file. The BUS and INST will be the files to be uplinked. The complete ATS, I used as a sanity check to see how the commands lined up. Since we are  in a new phase of ATS generation. IF you have any ideas of doing this differently, let me know.
>  
> The 3 ATS files have been changed to word  files and encrypted. I will send out another email with the password. The files that have been transferred via MFT have not been encrypted and are still text files.  
>  
> I moved the 2 House Keeping commands from the INST ATS to the BUS ATS. I commented out the 2 commands in the INST ATS. If for some reason we were unable to uplink the INST Commands for this orbit, we would have been in the wrong spacecraft state for executing the maneuver commands.
>  
> Battery Balancing this orbit
> No Battery Balancing this orbit
>  
> 5.       Orbit# 494 Reset Master Timer command
> The Master Timer Reset Command is set for 2020/07:22:08:45:00. This command will execute on the following contact for Orbit 494
> IBEX,USAK01,ADD,07/22/20,204,08:00:00,07/22/20,204,09:00:00,LAHO 160K IBEX-2 Orbit# 494 SSR_Dump/Tracking Contact 13 asc
>  
> 6.       APL Contact
> Just a reminder for the APL contact. We start off at 2k D\L, after 5 minutes we switch to 320k D\L, Then 5 minutes later we start the SSR Dump With Dump
> IBEX,APL-18,ADD,2020-08-09,222,14:00:00,2020-08-09,222,15:00:00,, LAHO 2K-360k Orbit# 496 SSR_Dump Contact Perigee
>  
> 7.       Command Load Constraint Violation Report (CCVR)
> IBEX_2020_213_o0496a_v001.ccvr
>  
> We have 2 IBX-CLC-006 Soft Constraint violations.  The reason it that there are 2 contacts that are  separated by 4 hours and the limit is 5 hours between contacts.  These are acceptable,
>  
> ==========================
> HARD CONSTRAINT VIOLATIONS
> ==========================
> NO VIOLATIONS.
>  
> ==========================
> SOFT CONSTRAINT VIOLATIONS
> ==========================
> IBX-CLC-006: Planned transmission at 2020/08/09 13:58:00 UTC - 2020/08/09
>              15:02:00 UTC is followed by one or more additional transmissions
>              which, when combined, exceed the maximum transmission time of 5400
>              seconds within a 18000-second window (total planned transmission
>              time this window is 7680.000 seconds)
> IBX-CLC-006: Planned transmission at 2020/08/09 18:58:00 UTC - 2020/08/09
>              20:02:00 UTC is preceded by one or more additional transmissions
>              which, when combined, exceed the maximum transmission time of 5400
>              seconds within a 18000-second window (total planned transmission
>              time this window is 7680.000 seconds)
> IBX-CLC-016: No command to enable spin pulse protection was found after
>              transition to science mode at 2020/07/31 15:26:46 UTC
> IBX-CLC-016: No command to enable spin pulse protection was found after
>              transition to science mode at 2020/08/04 14:38:40 UTC
>  
> ==============
> OTHER MESSAGES
> ==============
> NO MESSAGES.
>  
>  
>  
>  
>  
> Timothy E.Perry
> CRS IBEX OCO-2
> Mission Operations
> timothy.perry at ngc.com
> Office (703) 406-5976
> Cell (301) 606-1430
>  
> <image001.png>
>  
>  
> <IBEX_2020_213_o0496a_BUS_v001.ccvr><IBEX_Orbit496_Contacts.txt><IBEX_2022_213_496a_v001.docx><IBEX_2022_213_496a_INST_v001.docx><IBEX_2022_213_496a_BUS_v001.docx><IBEX_2020_213_o0496a_v001.ccvr><IBEX_2020_213_o0496a_INST_v001.oef><IBEX_2020_213_o0496a_INST_v001.ccvr><IBEX_2020_213_o0496a_BUS_v001.oef><IBEX-Command-Approval-Checklist-Rev16_F_496_TEP.docx>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20200721/eb9f29c0/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IBEX-Command-Approval-Checklist-Rev16g-o496-nga.ngpdf
Type: application/octet-stream
Size: 162919 bytes
Desc: not available
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20200721/eb9f29c0/IBEX-Command-Approval-Checklist-Rev16g-o496-nga-0001.ngpdf>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20200721/eb9f29c0/attachment-0003.html>