[Isocops] [Not Virus Scanned] IBEX Orbit #513 ATS Approval (3 - 11 Jan 21)

Nigel Angold angoldconsulting at earthlink.net
Wed Dec 23 16:31:44 EST 2020


I approve IBEX_2021_002_o0513a_BUS_v001.scr and IBEX_2021_002_o0513a_INST_v001.scr

Nigel

> All,
>    Attached are the planning files for Orbit #513
> Please respond to this thread with comments and approvals.  
> Approvals are required by COB on 23 December 2020
>  
> Please note the following:
> I generated 3 separate ATS files BUS, INST and a complete file. The BUS and INST will be the files to be uplinked. The complete ATS, I used as a sanity check to see how the commands lined up. Since we are in a new phase of ATS generation. IF you have any ideas of doing this differently, let me know.
>  
> The 3 ATS files have been changed to word files and encrypted. I will send out another email with the password. The files that have been transferred via MFT have not been encrypted and are still text files.  
>  
> I moved the 2 House Keeping commands from the INST ATS to the BUS ATS. I commented out the 2 commands in the INST ATS. If for some reason we were unable to uplink the INST Commands for this orbit, we would have been in the wrong spacecraft state for executing the maneuver commands.
>  
> Battery Balancing this orbit
> # Orbit 513 Battery Balancing
> # 2021-01-11T11:06:53.696Z,Perigee,orbit:513
>  Begin - 2021/01:11:11:00:00 End - 2021/01:11:12:30:00
>  
> 5.       APOGEE: Sun Maneuver -  $TIME=2021/01:07:00:28:45
>  
> 6.       # Orbit# 490 Reset Master Timer  - 2020/12:25:01:15:00
>  
> 7.       Command Load Constraint Violation Report (CCVR)
> IBEX_2021_002_o0513a_v001.ccvr
> # Input files:         1
> #   IBEX_2021_002_o0513a_v001.scr
>  
> ==========================
> HARD CONSTRAINT VIOLATIONS
> ==========================
> NO VIOLATIONS.
>  
> ==========================
> SOFT CONSTRAINT VIOLATIONS
> ==========================
> IBX-CLC-016: No command to enable spin pulse protection was found after
>              transition to science mode at 2021/01/02 22:33:30 UTC
> IBX-CLC-016: No command to enable spin pulse protection was found after
>              transition to science mode at 2021/01/07 01:43:51 UTC
>  
> ==============
> OTHER MESSAGES
> ==============
> NO MESSAGES..
>  
>  
>  
> Timothy E.Perry
> CRS IBEX OCO-2
> Mission Operations
> timothy.perry at ngc.com
> Office (703) 406-5976
> Cell (301) 606-1430
>  
> <image001.png>
>  
>  
> <IBEX_2021_002_o0513a_BUS_v001.docx><IBEX_2021_002_o0513a_INST_v001.docx><IBEX_2021_002_o0513a_v001.docx><IBEX_2021_002_o0513a_BUS_v001.ccvr><IBEX_2021_002_o0513a_INST_v001.ccvr><IBEX_2021_002_o0513a_v001.ccvr><IBEX_2021_002_o0513a_BUS_v001.oef><IBEX_2021_002_o0513a_INST_v001.oef><IBEX_Orbit513_Contacts.txt><IBEX-Command-Approval-Checklist-Rev16_F_513_TEP.docx>
> Please restrict discussions on this email list to non-ITAR sensitive topics.
> ______________________________________________
> Isocops mailing list
> Isocops at lists.sr.unh.edu
> https://lists.sr.unh.edu/mailman/listinfo/isocops

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20201223/f852e40e/attachment.html>


More information about the Isocops mailing list