[Isocops] IBEX Orbit #485 ATS Approval ( 23 Apr - 02 May 2020 )

Nigel Angold angoldconsulting at earthlink.net
Sat Apr 11 17:20:34 EDT 2020


I approve IBEX_2020_113_o0485a_BUS_v001.scr for uplink no earlier than USHI01,LAHO 40K IBEX-3 Orbit# 483 Tracking Contact 13re perigee: 4/14/2020  02:00:00 UTC

I approve IBEX_2020_113_o0485a_INST_v001.scr for uplink no earlier than AUWA01,LAHO 2K IBEX-3 Orbit# 484 Tracking Contact 16re Desc: 4/22/2020  09:30:00 UTC

The files are not in the merged ATS yet.

Please post the .scr, .oef and .ccvr files to the server.

Thanks.
Nigel

> Thank you!
> 
> Nigel
> 
>> All,
>>    Attached are the planning files for Orbit #485
>> Please respond to this thread with comments and approvals.  
>> Approvals are required by COB on 13 April 2020
>>  
>> Please note the following:
>> 1.       I generated 3 separate ATS files BUS, INST and a complete file. The BUS and INST will be the files to be uplinked. The complete ATS, I used as a sanity check to see how the commands lined up. Since we are in a new phase of ATS generation. IF you have any ideas of doing this differently, let me know. 
>>  
>> 2.       The 3 ATS files have been changed to word docx files and encrypted. I will send out another email with the password. The files that have been transferred via MFT have not been encrypted and are still text files.
>>  
>> 3.       Battery Balancing
>> # Orbit 485 Battery Balancing 
>> # 2020-05-01T21:48:29.446Z,Perigee,orbit:485
>>   @ECT_SetLongEclipseFlag TRUE $TIME=2020/05:01:21:00:00
>>   @ECT_SetLongEclipseFlag FALSE $TIME=2020/05:01:22:30:00
>>  
>> 4.       Command Load Constraint Violation Report (CCVR)
>> IBEX_2020_113_o0485a_v001_.ccvr
>> ==========================
>> HARD CONSTRAINT VIOLATIONS
>> ==========================
>> NO VIOLATIONS.
>>  
>> ==========================
>> SOFT CONSTRAINT VIOLATIONS
>> ==========================
>> IBX-CLC-016: No command to enable spin pulse protection was found after
>>              transition to science mode at 2020/04/23 06:10:09 UTC
>> IBX-CLC-016: No command to enable spin pulse protection was found after
>>              transition to science mode at 2020/04/27 01:36:50 UTC
>>  
>> ==============
>> OTHER MESSAGES
>> ==============
>> NO MESSAGES.
>>  
>>  
>> Timothy E.Perry
>> CRS IBEX OCO-2
>> Mission Operations
>> timothy.perry at ngc.com <mailto:timothy.perry at ngc.com>
>> Office (703) 406-5976
>> Cell (301) 606-1430
>>  
>> <image001.png>
>>  
>>  
>> <IBEX_2020_113_o0485a_INST_v001_.ccvr><IBEX_2020_113_o0485a_v001_.ccvr><IBEX_2020_113_o0485a_BUS_v001_.ccvr><IBEX_2020_113_o0485a_v001.docx><IBEX_2020_113_o0485a_BUS_v001.docx><IBEX_2020_113_o0485a_INST_v001.docx><IBEX_2020_113_o0485a_v001.oef><IBEX_2020_113_o0485a_INST_v001.oef><IBEX_Orbit485_Contacts.txt><IBEX-Command-Approval-Checklist-Rev16_F_485_TEP.docx>
> 
> 
> Please restrict discussions on this email list to non-ITAR sensitive topics.
> ______________________________________________
> Isocops mailing list
> Isocops at lists.sr.unh.edu
> https://lists.sr.unh.edu/mailman/listinfo/isocops

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20200411/2c86a67e/attachment.html>


More information about the Isocops mailing list