[Isocops] IBEX Orbit #438 ATS Approval ( 20 Feb - 1 Mar ) - v001 approval
KEN FAIRCHILD
fair-play at comcast.net
Sat Feb 9 14:25:05 EST 2019
All,
I have looked at the orbit 438 ATS,
IBEX_2019_051_o0438a_v001.scr,
and I approve.
The only constraint violations in
IBEX_2019_051_o0438a_v001_.ccvr
are from the removal of the
ACT_SetSpinPulseProtectEnable Enable
commands (2); the violations are expected.
The PL commands in the v001 ATS match those in the v002 STF,
IBEX_2019_051_o0438a_v002.stf.
Ascending and descending command sequences are consistent with each other, 15 Re ascending, the apogee maneuver time and 15 Re descending as determined from the OEF,
IBEX_2019_051_o0438a_v001.oef,
and as verified with ibex_orbit.
There is one star tracker outage. The outage starts almost 3 days before orbit 437 15 Re descending and runs for over 7 days. Some despinning may be required due to this outage.
The ground station command sequences are correct and the timing and bit rates match those in the contacts file,
IBEX_Orbit438_Contacts.txt,
for all contacts (3).
We are doing battery cell balancing this orbit and the balancing commands are correct and offset by enough time from other commands.
The sun precession maneuver at perigee of orbit 437 left us pointing in safe directions for the orbit 438 arc A ascending and descending sequences:
ibex_rotate -o -r +332.645 -d -11.248 -w ibex-sun -t 2019/02:20:14:19:21
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI +0.871117,-0.450676,-0.195056
which is R.A. +332.645 Decl. -11.248
missing R.A. +333.432 Decl. -10.997 (ibex-sun)
error is R.A. +0.787 Decl. +0.251
for a total 0.813 deg
ibex_rotate -o -r +332.645 -d -11.248 -w ibex-sun -t 2019/02:24:12:48:13
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI +0.871117,-0.450676,-0.195056
which is R.A. +332.645 Decl. -11.248
missing R.A. +337.250 Decl. -9.518 (ibex-sun)
error is R.A. +4.605 Decl. +1.730
for a total 4.849 deg
The inertial precession maneuver at apogee leaves us pointing in safe directions at the time of the maneuver and for arc B ascending and descending sequences:
ibex_rotate -o -u 0.918417,-0.359184,-0.165822 -w ibex-sun -t 2019/02:24:14:30:12
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI +0.918417,-0.359184,-0.165822
which is R.A. +338.640 Decl. -9.545
missing R.A. +337.316 Decl. -9.491 (ibex-sun)
error is R.A. +1.324 Decl. +0.054
for a total 1.307 deg
ibex_rotate -o -u 0.918417,-0.359184,-0.165822 -w ibex-sun -t 2019/02:24:16:06:27
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI +0.918417,-0.359184,-0.165822
which is R.A. +338.640 Decl. -9.545
missing R.A. +337.378 Decl. -9.465 (ibex-sun)
error is R.A. +1.262 Decl. +0.080
for a total 1.247 deg
ibex_rotate -o -u 0.918417,-0.359184,-0.165822 -w ibex-sun -t 2019/02:28:20:03:54
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI +0.918417,-0.359184,-0.165822
which is R.A. +338.640 Decl. -9.545
missing R.A. +341.196 Decl. -7.931 (ibex-sun)
error is R.A. +2.556 Decl. +1.614
for a total 2.998 deg
The inertial maneuver at perigee leaves us pointing in safe directions at the time of the maneuver and at orbit 439 apogee:
ibex_rotate -o -u 0.946998,-0.290539,-0.137047 -w ibex-sun -t 2019/02:28:23:02:35
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI +0.946998,-0.290539,-0.137047
which is R.A. +342.944 Decl. -7.877
missing R.A. +341.315 Decl. -7.889 (ibex-sun)
error is R.A. +1.629 Decl. +0.012
for a total 1.614 deg
ibex_rotate -o -u 0.946998,-0.290539,-0.137047 -w ibex-sun -t 2019-03-05T20:24:28.429Z
Quaternion +0.000000,+0.000000,+0.000000,+0.000000
points axis +1.000000,+0.000000,+0.000000
towards ECI +0.946998,-0.290539,-0.137047
which is R.A. +342.944 Decl. -7.877
missing R.A. +346.004 Decl. -5.984 (ibex-sun)
error is R.A. +3.060 Decl. +1.893
for a total 3.579 deg
No Lo O-mode.
There is no overlap with orbit 437 commands by manual inspection or by checking at
http://ibex.unh.edu/cgi-bin/ats.cgi.
Command Approval Checklist is attached.
Ken
> On February 6, 2019 at 1:46 PM "Perry, Timothy" <Timothy.Perry at ngc.com> wrote:
>
>
> All,
>
> Attached are the planning files for Orbit #438.
>
> Please respond to this thread with comments and approvals.
>
> Approvals are required by COB on 9 Feb 2019.
>
>
>
> Please note the following:
>
> 1. Over Lap in commands from the previous ATS.
>
> The second perigee pass for Orbit 437 transmitter on commands start prior to the execution of the Orbit# 438 Ascending BUS Commands. Then the transmitter off command executes between the Orbit# 438 Ascending BUS Commands and the Orbit 438 Ascending Payload Commands. This should not be an issue since the timed commands are sorted by time when they are uplinked to the spacecraft.
>
>
>
> # Orbit # 437 SSR_Dump/Tracking Contact
>
> @ECT_SetRelay stx,on $TIME=2019/02:20:11:58:00
>
> @FMI_SetDownlink160K $TIME=2019/02:20:11:58:02
>
> @FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2019/02:20:11:58:04
>
> @FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2019/02:20:11:58:06
>
>
>
> # Orbit# 438 Ascending BUS Commands
>
> @FCT_SetScState science $TIME=2019/02:20:12:12:29
>
> @CEU_LO_SCIENCE_MODE NORMAL $TIME=2019/02:20:12:12:31
>
>
>
> # Orbit # 437 SSR_Dump/Tracking Contact
>
> @ECT_SetRelay stx,off $TIME=2019/02:20:13:02:00
>
>
>
> # Orbit# 438 Ascending Payload Commands
>
> @CEU_MACRO_EXEC ASCENDING_PL1 $TIME=2019/02:20:14:19:21
>
>
>
> 1. Orbit 438 Battery Balancing
>
> # 2019-03-01T06:41:01.615Z,Perigee,orbit:438
>
> @ECT_SetLongEclipseFlag TRUE $TIME=2019/03:01:06:00:00
>
> @ECT_SetLongEclipseFlag FALSE $TIME=2019/03:01:07:30:00
>
>
>
> 1. IBEX_2019_051_o0438a_v001_.ccvr
>
> # Input files: 1
>
> # IBEX_2019_051_o0438a_v001.scr
>
>
>
> ==========================
>
> HARD CONSTRAINT VIOLATIONS
>
> ==========================
>
> NO VIOLATIONS.
>
>
>
> ==========================
>
> SOFT CONSTRAINT VIOLATIONS
>
> ==========================
>
> IBX-CLC-016: No command to enable spin pulse protection was found after
>
> transition to science mode at 2019/02/20 12:12:29 UTC
>
> IBX-CLC-016: No command to enable spin pulse protection was found after
>
> transition to science mode at 2019/02/24 15:36:27 UTC
>
>
>
> ==============
>
> OTHER MESSAGES
>
> ==============
>
> NO MESSAGES.
>
>
>
>
>
>
>
> Timothy E. Perry
>
> Mission Operations
>
> CRS, IBEX, OCO-2 & TESS
>
> RAPTOR Test Team
>
> timothy.perry at ngc.com mailto:timothy.perry at ngc.com
>
> Office (703) 406-5976
>
> Cell (301) 606-1430
>
>
>
>
>
>
>
> ---------------------------------------------
> Notice: This e-mail is intended solely for use of the individual or entity to which it is addressed and may contain information that is proprietary, privileged and/or exempt from disclosure under applicable law. If the reader is not the intended recipient or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. This communication may also contain data subject to U.S. export laws. If so, data subject to the International Traffic in Arms Regulation cannot be disseminated, distributed, transferred, or copied, whether incorporated or in its original form, to foreign nationals residing in the U.S. or abroad, absent the express prior approval of the U.S. Department of State. Data subject to the Export Administration Act may not be disseminated, distributed, transferred or copied contrary to U. S. Department of Commerce regulations. If you have received this communication in error, please notify the sender by reply e-mail and destroy the e-mail message and any physical copies made of the communication.
> Thank you.
> *********************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20190209/70d81475/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IBEX-Command-Approval-Checklist-Rev16e-o0438_KWF.doc
Type: application/msword
Size: 119808 bytes
Desc: not available
URL: <https://lists.sr.unh.edu/pipermail/isocops/attachments/20190209/70d81475/IBEX-Command-Approval-Checklist-Rev16e-o0438_KWF-0001.doc>
More information about the Isocops
mailing list