[Isocops] Cron <ibexops at ena> $IBEX_CRON/cronswitch.sh sftp_driver sync < /dev/null >/dev/null
Cron Daemon
root at ena.sr.unh.edu
Tue Jan 9 16:26:11 EST 2018
sh: ibex_time: command not found
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#1)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
Use of uninitialized value in scalar chomp at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#1)
(W uninitialized) An undefined value was used as if it were already
defined. It was interpreted as a "" or a 0, but maybe it was a mistake.
To suppress this warning assign a defined value to your variables.
To help you figure out what was undefined, perl tells you what operation
you used the undefined value in. Note, however, that perl optimizes your
program and the operation displayed in the warning may not necessarily
appear literally in your program. For example, "that $foo" is
usually optimized into "that " . $foo, and the warning will refer to
the concatenation (.) operator, even though there is no . in your
program.
Use of uninitialized value in substitution (s///) at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/ops2raw_filer.pl line 186 (#1)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
sh: ibex_time: command not found
Can't exec "ibex_orbit": No such file or directory at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/id_config.pl line 27 (#2)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
Use of uninitialized value in printf at
/home/ibexops/IBEX/sw/i686-5.e/lib/perl5/site_perl/sftp-util.pl line 295 (#1)
Use of uninitialized value in concatenation (.) or string at
/home/ibexops/IBEX/sw/isoc/src/ops/admin/pipe/ops2raw_filer.pl line 238 (#1)
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/sftp_wakeup.sh: line 54: ibex_orbit: command not found
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/sftp_wakeup.sh: line 55: ibex_orbit: command not found
More information about the Isocops
mailing list