[Isocops] Cron <ibexops at ena> $IBEX_CRON/cronswitch.sh wakeup < /dev/null >/dev/null

[Cron Daemon]

cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
grep: /home/ibexops/IBEX/raw/o0355/IBEX_2015_294_o0304a_Recovery_v001: No such file or directory
grep: (2).scr: No such file or directory
grep: /home/ibexops/IBEX/raw/o0355/IBEX_2015_294_o0304a_Recovery_v001: No such file or directory
grep: (2).scr: No such file or directory
cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
cat: temp_file: No such file or directory
/home/ibexops/IBEX/sw/i686-5.e/bin/ip2oftf.sh: line 127: [: 2014/08:11:12:20:38: integer expression expected
### INCOMPLETE FRAME AT \begintext AT LINE 61, haveBits=0x00001dfd
### INCOMPLETE FRAME AT \begintext AT LINE 93, haveBits=0x00000ffe
Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 112 (#1)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 112 (#1)
    (W uninitialized) An undefined value was used as if it were already
    defined.  It was interpreted as a "" or a 0, but maybe it was a mistake.
    To suppress this warning assign a defined value to your variables.
    
    To help you figure out what was undefined, perl tells you what operation
    you used the undefined value in.  Note, however, that perl optimizes your
    program and the operation displayed in the warning may not necessarily
    appear literally in your program.  For example, "that $foo" is
    usually optimized into "that " . $foo, and the warning will refer to
    the concatenation (.) operator, even though there is no . in your
    program.
    
Use of uninitialized value in int at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 167, <FP> line 112 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 22 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 22 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 34 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 34 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 34 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 137, <FP> line 34 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 137, <FP> line 34 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 138, <FP> line 34 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 139, <FP> line 34 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 139, <FP> line 34 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in split at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 139, <FP> line 34 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 140, <FP> line 34 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 143, <FP> line 34 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 143, <FP> line 34 (#1)
Use of uninitialized value in int at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 146, <FP> line 34 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 59 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 59 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 59 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 59 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 59 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 59 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 59 (#1)
Use of uninitialized value in int at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 167, <FP> line 59 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 83 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 83 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 83 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 83 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 83 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 83 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 83 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 83 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 83 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 83 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 95 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 95 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 95 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 95 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 95 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 95 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 95 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 95 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 95 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 95 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 112 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 112 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 112 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 112 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 112 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 112 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 22 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 22 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 22 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 22 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 22 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 22 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 34 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 34 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 34 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 34 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 34 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 34 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 34 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 34 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 44 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 44 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 44 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 44 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 44 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 44 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 44 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 68 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 68 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 68 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 68 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 68 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 68 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 68 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 68 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 68 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 68 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 80 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 80 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 80 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 80 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 80 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 80 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 80 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 80 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 80 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 80 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 105 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 105 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 105 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 105 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 105 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 105 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 105 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 25 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 25 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 25 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 25 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 25 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 25 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 25 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 25 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 25 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 25 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 37 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 37 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 37 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 37 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 37 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 37 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 37 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 37 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 37 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 37 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 48 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 48 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 48 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 48 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 48 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 48 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 48 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 75 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 75 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 75 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 75 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 75 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 75 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 75 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 75 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 75 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 75 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 87 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 87 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 87 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 87 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 87 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 87 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 87 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 87 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 87 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 87 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 106 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 106 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 106 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 106 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 106 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 106 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 106 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 34 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 34 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 59 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 59 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 83 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 83 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 94 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 94 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 94 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 94 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 94 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 94 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 94 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 94 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 94 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 94 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 118 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 118 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 118 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 118 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 118 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 118 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 118 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 33 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 33 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 33 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 33 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 33 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 33 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 33 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 33 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 50 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 50 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 50 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 50 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 50 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 50 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 50 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 74 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 74 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 74 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 74 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 74 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 74 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 74 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 74 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 74 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 74 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 85 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 85 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 85 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 85 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 85 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 85 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 85 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 85 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 85 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 85 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 110 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 110 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 110 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 110 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 110 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 110 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 110 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 49 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 49 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 49 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 49 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 49 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 49 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 49 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 73 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 73 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 73 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 73 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 73 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 73 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 73 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 73 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 73 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 73 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 84 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 84 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 84 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 84 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 84 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 84 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 84 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 84 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 84 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 84 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 101 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 101 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 101 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 101 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 101 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 101 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 101 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 61 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 61 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 61 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 61 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 61 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 61 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 61 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 80 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 80 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 91 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 91 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 91 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 91 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 91 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 91 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 91 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 91 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 91 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 91 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 108 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 108 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 108 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 108 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 108 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 108 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 108 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 43 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 43 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 43 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 43 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 43 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 43 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 43 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 67 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 67 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 67 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 67 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 67 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 67 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 67 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 67 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 67 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 67 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 78 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 78 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 78 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 78 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 78 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 78 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 78 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 78 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 78 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 78 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 88 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 88 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 88 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 88 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 88 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 88 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 88 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 57 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 57 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 57 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 57 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 57 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 57 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 57 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 81 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 81 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 81 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 81 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 81 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 81 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 81 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 81 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 81 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 81 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 92 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 92 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 92 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 92 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 92 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 92 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 92 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 92 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 92 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 92 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 117 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 117 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 117 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 117 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 117 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 117 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 117 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 57 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 57 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 81 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 81 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 92 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 92 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 117 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 117 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 49 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 49 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 73 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 73 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 84 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 84 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 101 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 101 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 53 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 53 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 53 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 53 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 53 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 53 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 53 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 77 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 77 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 77 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 77 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 77 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 77 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 77 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 77 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 77 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 77 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 89 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 89 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 89 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 89 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 89 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 89 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 89 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 89 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 89 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 89 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 106 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 106 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 52 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 52 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 52 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 52 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 52 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 52 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 52 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 76 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 76 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 76 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 76 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 76 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 76 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 76 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 76 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 76 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 76 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 88 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 119, <FP> line 88 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 121, <FP> line 88 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 88 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 123, <FP> line 88 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 88 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 88 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 88 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 88 (#1)
Use of uninitialized value in numeric gt (>) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 125, <FP> line 88 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 111 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 154, <FP> line 111 (#1)

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 111 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    
Use of uninitialized value in scalar chomp at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 157, <FP> line 111 (#1)
Use of uninitialized value in exists at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 158, <FP> line 111 (#1)
Use of uninitialized value in hash element at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 111 (#1)
Use of uninitialized value in concatenation (.) or string at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 160, <FP> line 111 (#1)

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 52 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 52 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 76 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 76 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 88 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 88 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 111 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 111 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 22 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 33 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 52 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 52 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 76 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 76 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 118, <FP> line 88 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 124, <FP> line 88 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_orbit": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 153, <FP> line 111 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Can't exec "ibex_time": No such file or directory at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 156, <FP> line 111 (#2)
    (W exec) A system(), exec(), or piped open call could not execute the
    named program for the indicated reason.  Typical reasons include: the
    permissions were wrong on the file, the file wasn't found in
    $ENV{PATH}, the executable in question was compiled for another
    architecture, or the #! line in a script points to an interpreter that
    can't be run for similar reasons.  (Or maybe your system doesn't support
    #! at all.)
    

Argument "a" isn't numeric in numeric lt (<) at
	/home/ibexops/IBEX/sw/i686-5.e/bin/create_arcs.pl line 181 (#2)
    (W numeric) The indicated string was fed as an argument to an operator
    that expected a numeric value instead.  If you're fortunate the message
    will identify which operator was so unfortunate.
    
/home/ibexops/IBEX/sw/i686-5.e/bin/scr_inert.sh: line 138: ibex_time: command not found
/home/ibexops/IBEX/sw/i686-5.e/bin/scr_inert.sh: line 139: ibex_orbit: command not found
/home/ibexops/IBEX/sw/i686-5.e/bin/scr_inert.sh: line 140: ibex_rotate: command not found
/home/ibexops/IBEX/sw/i686-5.e/bin/scr_inert.sh: line 212: scr_inert.pl: command not found
/home/ibexops/IBEX/sw/i686-5.e/bin/scr_inert.sh: line 221: ip2oftf.sh: command not found
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/plops_wakeup.sh: line 96: scr_inert.sh: command not found
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/plops_wakeup.sh: line 82: scr_inert.sh: command not found
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/plops_wakeup.sh: line 96: scr_inert.sh: command not found
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/plops_wakeup.sh: line 82: scr_inert.sh: command not found
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/plops_wakeup.sh: line 96: scr_inert.sh: command not found
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/plops_wakeup.sh: line 82: scr_inert.sh: command not found
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/plops_wakeup.sh: line 96: scr_inert.sh: command not found
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/plops_wakeup.sh: line 82: scr_inert.sh: command not found
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/plops_wakeup.sh: line 87: 10#IBEX_2015_021_o0274a_HGC_V001: value too great for base (error token is "10#IBEX_2015_021_o0274a_HGC_V001")
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/hvsci_wakeup.sh: line 28: ibex_orbit: command not found
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/hvsci_wakeup.sh: line 31: ibex_orbit: command not found
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/hvsci_wakeup.sh: line 34: ibex_time: command not found
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/hvsci_wakeup.sh: line 37: [: : integer expression expected
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/hvsci_wakeup.sh: line 47: - : syntax error: operand expected (error token is " ")
/home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/usnsh_wakeup.sh: line 16: ibex_orbit: command not found

AT: 2017.034.21.21.01

cronswitch.sh wakeup

IBEX_HOME=/home/ibexops/IBEX
IBEX_ROOT=/home/ibexops/IBEX/sw
IBEX_CRON=/home/ibexops/IBEX/sw/isoc/src/ops/admin
IBEX_ARCH=i686-5.e
IBEX_PRIMARY=true

executing wakeup driver ...
%%% /home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/track_wakeup.sh :
%%% /home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/plops_wakeup.sh :
IBEX_ID=id-leops scr_inert.sh update arc=true \
    /home/ibexops/IBEX/raw/o0355/IBEX_2015_303_o0305a_v001.scr
Created file: science_arcs.txt
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
# skipping 0245
# skipping 0246
# skipping 0247
# skipping 0248
# skipping 0249
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
# skipping 0260
# skipping 0261
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
# skipping 0270
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
# skipping 0281
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
# skipping 0300
# skipping 0300a
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0305b/o0305b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0305b/o0305b.attdba  ipstr='0305b 0 +216.374023 -15.037009 2015/11:03:23:22:43'
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0306a/o0306a.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0306a/o0306a.attdba  ipstr='0306a 0 +220.933025 -16.442024 2015/11:08:15:22:57'
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
Reprocessing previous orbit ATS file(s)
IBEX_ID=id-leops scr_inert.sh update \
    /home/ibexops/IBEX/raw/o0302/IBEX_2015_294_o0304a_hgc_v001.scr /home/ibexops/IBEX/raw/o0302/IBEX_2015_294_o0304a_v000.scr /home/ibexops/IBEX/raw/o0302/IBEX_2015_294_o0304a_v001.scr /home/ibexops/IBEX/raw/o0304/IBEX_2015_294_o0304a_recovery_sun_man_v001.scr /home/ibexops/IBEX/raw/o0355/IBEX_2015_294_o0304a_Recovery_v001 (2).scr /home/ibexops/IBEX/raw/o0355/IBEX_2015_294_o0304a_recovery_sun_man_v001.scr /home/ibexops/IBEX/raw/o0355/IBEX_2015_294_o0304a_Recovery_comm_v001.scr /home/ibexops/IBEX/raw/o0355/IBEX_2015_294_o0304a_Recovery_v001.scr /home/ibexops/IBEX/raw/o0355/IBEX_2015_294_o0304a_hgc_v001.scr /home/ibexops/IBEX/raw/o0355/IBEX_2015_294_o0304a_v001.scr
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
# skipping 0245
# skipping 0246
# skipping 0247
# skipping 0248
# skipping 0249
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
# skipping 0260
# skipping 0261
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
# skipping 0270
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
# skipping 0281
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
# skipping 0300
# skipping 0300a
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0304a/o0304a.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0304a/o0304a.attdba  ipstr='0304a 0 +206.151800 -10.822900 2015/10:22:02:09:00'
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0304b/o0304b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0304b/o0304b.attdba  ipstr='0304b 0 +207.517012 -11.950992 2015/10:25:19:26:47'
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0305a/o0305a.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0305a/o0305a.attdba  ipstr='0305a 0 +211.853980 -13.483005 2015/10:30:09:05:41'
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
IBEX_ID=id-leops scr_inert.sh update arc=true \
    /home/ibexops/IBEX/raw/o0355/IBEX_2014_349_o0270a_v001.scr
Created file: science_arcs.txt
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
# skipping 0245
# skipping 0246
# skipping 0247
# skipping 0248
# skipping 0249
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
# skipping 0260
# skipping 0261
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
# skipping 0270
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0270b/o0270b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0270b/o0270b.attdba  ipstr='0270b 0 +268.584016 -18.762005 2014/12:19:17:02:47'
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0271a/o0271a.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0271a/o0271a.attdba  ipstr='0271a 0 +274.153980 -18.698006 2014/12:24:07:24:28'
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
# skipping 0281
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
# skipping 0300
# skipping 0300a
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
Reprocessing previous orbit ATS file(s)
IBEX_ID=id-leops scr_inert.sh update \
    /home/ibexops/IBEX/raw/o0267/IBEX_2014_340_o0269a_v001.scr /home/ibexops/IBEX/raw/o0355/IBEX_2014_340_o0269a_v001.scr
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
# skipping 0245
# skipping 0246
# skipping 0247
# skipping 0248
# skipping 0249
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
# skipping 0260
# skipping 0261
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0269b/o0269b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0269b/o0269b.attdba  ipstr='0269b 0 +256.683005 -23.462013 2014/12:10:10:19:06'
# skipping 0270
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0270a/o0270a.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0270a/o0270a.attdba  ipstr='0270a 0 +264.292987 -18.647980 2014/12:15:02:51:20'
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
# skipping 0281
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
# skipping 0300
# skipping 0300a
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
IBEX_ID=id-leops scr_inert.sh update arc=true \
    /home/ibexops/IBEX/raw/o0355/IBEX_2014_214_o0255a_v001.scr
Created file: science_arcs.txt
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
# skipping 0245
# skipping 0246
# skipping 0247
# skipping 0248
# skipping 0249
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0255b/o0255b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0255b/o0255b.attdba  ipstr='0255b 0 +133.988019 +16.721027 2014/08:06:08:45:30'
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0256a/o0256a.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0256a/o0256a.attdba  ipstr='0256a 0 +138.345013 +15.478987 2014/08:11:12:20:38'
# skipping 0260
# skipping 0261
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
# skipping 0270
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
# skipping 0281
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
# skipping 0300
# skipping 0300a
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
Reprocessing previous orbit ATS file(s)
IBEX_ID=id-leops scr_inert.sh update \
    /home/ibexops/IBEX/raw/o0355/IBEX_2014_205_o0254a_v001.scr /home/ibexops/IBEX/raw/o0252/IBEX_2014_205_o0254a_v001.scr
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
# skipping 0245
# skipping 0246
# skipping 0247
# skipping 0248
# skipping 0249
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0254b/o0254b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0254b/o0254b.attdba  ipstr='0254b 0 +125.177016 +18.914999 2014/07:28:06:55:20'
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0255a/o0255a.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0255a/o0255a.attdba  ipstr='0255a 0 +129.740995 +17.848981 2014/08:01:20:46:39'
# skipping 0260
# skipping 0261
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
# skipping 0270
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
# skipping 0281
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
# skipping 0300
# skipping 0300a
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
IBEX_ID=id-leops scr_inert.sh update arc=true \
    /home/ibexops/IBEX/raw/o0355/IBEX_2014_258_o0260a_v002.scr
Created file: science_arcs.txt
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
# skipping 0245
# skipping 0246
# skipping 0247
# skipping 0248
# skipping 0249
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
# skipping 0260
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0260b/o0260b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0260b/o0260b.attdba  ipstr='0260b 0 +174.949007  +1.553020 2014/09:19:23:54:10'
# skipping 0261
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0261a/o0261a.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0261a/o0261a.attdba  ipstr='0261a 0 +179.051017  -0.205005 2014/09:24:12:16:49'
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
# skipping 0270
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
# skipping 0281
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
# skipping 0300
# skipping 0300a
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
Reprocessing previous orbit ATS file(s)
IBEX_ID=id-leops scr_inert.sh update \
    /home/ibexops/IBEX/raw/o0355/IBEX_2014_250_o0259a_v001.scr /home/ibexops/IBEX/raw/o0257/IBEX_2014_250_o0259a_v001.scr
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
# skipping 0245
# skipping 0246
# skipping 0247
# skipping 0248
# skipping 0249
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0259b/o0259b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0259b/o0259b.attdba  ipstr='0259b 0 +166.946008  +4.964011 2014/09:11:01:31:46'
# skipping 0260
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0260a/o0260a.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0260a/o0260a.attdba  ipstr='0260a 0 +170.984011  +3.269982 2014/09:15:11:59:20'
# skipping 0261
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
# skipping 0270
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
# skipping 0281
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
# skipping 0300
# skipping 0300a
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
IBEX_ID=id-leops scr_inert.sh update arc=true \
    /home/ibexops/IBEX/raw/o0355/IBEX_2014_121_o0245a_v002.scr
Created file: science_arcs.txt
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
# skipping 0245
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0245b/o0245b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0245b/o0245b.attdba  ipstr='0245b 0  +41.311995 +15.363988 2014/05:06:05:34:32'
# skipping 0246
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0246a/o0246a.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0246a/o0246a.attdba  ipstr='0246a 0  +45.862031 +16.690997 2014/05:10:23:34:19'
# skipping 0247
# skipping 0248
# skipping 0249
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
# skipping 0260
# skipping 0261
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
# skipping 0270
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
# skipping 0281
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
# skipping 0300
# skipping 0300a
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
Reprocessing previous orbit ATS file(s)
IBEX_ID=id-leops scr_inert.sh update \
    /home/ibexops/IBEX/raw/o0355/IBEX_2014_112_o0244a_v001.scr /home/ibexops/IBEX/raw/o0242/IBEX_2014_112_o0244a_v002.scr /home/ibexops/IBEX/raw/o0242/IBEX_2014_112_o0244a_hgc_v001.scr /home/ibexops/IBEX/raw/o0242/IBEX_2014_112_o0244a_v001.scr
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0244b/o0244b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0244b/o0244b.attdba  ipstr='0244b 0  +32.454013 +12.482003 2014/04:26:21:36:55'
# skipping 0245
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0245a/o0245a.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0245a/o0245a.attdba  ipstr='0245a 0  +36.810019 +13.961980 2014/05:01:13:19:52'
# skipping 0246
# skipping 0247
# skipping 0248
# skipping 0249
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
# skipping 0260
# skipping 0261
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
# skipping 0270
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
# skipping 0281
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
# skipping 0300
# skipping 0300a
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
IBEX_ID=id-leops scr_inert.sh update arc=true \
    /home/ibexops/IBEX/raw/o0355/IBEX_2014_149_o0248a_v001.scr
Created file: science_arcs.txt
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
# skipping 0245
# skipping 0246
# skipping 0247
# skipping 0248
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0248b/o0248b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0248b/o0248b.attdba  ipstr='0248b 0  +68.925021 +21.440021 2014/06:03:03:16:28'
# skipping 0249
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0249a/o0249a.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0249a/o0249a.attdba  ipstr='0249a 0  +73.795977 +22.030987 2014/06:08:01:54:42'
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
# skipping 0260
# skipping 0261
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
# skipping 0270
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
# skipping 0281
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
# skipping 0300
# skipping 0300a
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
Reprocessing previous orbit ATS file(s)
IBEX_ID=id-leops scr_inert.sh update \
    /home/ibexops/IBEX/raw/o0245/IBEX_2014_140_o0247a_v001.scr /home/ibexops/IBEX/raw/o0355/IBEX_2014_140_o0247a_v001.scr
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
# skipping 0245
# skipping 0246
# skipping 0247
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0247b/o0247b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0247b/o0247b.attdba  ipstr='0247b 0  +59.488011 +19.889976 2014/05:24:19:03:05'
# skipping 0248
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0248a/o0248a.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0248a/o0248a.attdba  ipstr='0248a 0  +64.175016 +20.740007 2014/05:29:14:10:37'
# skipping 0249
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
# skipping 0260
# skipping 0261
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
# skipping 0270
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
# skipping 0281
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
# skipping 0300
# skipping 0300a
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
IBEX_ID=id-leops scr_inert.sh update arc=true \
    /home/ibexops/IBEX/raw/o0355/IBEX_2015_076_o0280a_v001.scr
Created file: science_arcs.txt
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
# skipping 0245
# skipping 0246
# skipping 0247
# skipping 0248
# skipping 0249
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
# skipping 0260
# skipping 0261
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
# skipping 0270
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0280b/o0280b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0280b/o0280b.attdba  ipstr='0280b 0 +359.012977  -1.063012 2015/03:21:17:19:59'
# skipping 0281
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0281a/o0281a.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0281a/o0281a.attdba  ipstr='0281a 0   +3.068979  +0.715987 2015/03:26:05:27:59'
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
# skipping 0300
# skipping 0300a
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
Reprocessing previous orbit ATS file(s)
IBEX_ID=id-leops scr_inert.sh update \
    /home/ibexops/IBEX/raw/o0277/IBEX_2015_067_o0279a_v001.scr /home/ibexops/IBEX/raw/o0355/IBEX_2015_067_o0279a_v001.scr
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
# skipping 0245
# skipping 0246
# skipping 0247
# skipping 0248
# skipping 0249
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
# skipping 0260
# skipping 0261
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
# skipping 0270
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0279b/o0279b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0279b/o0279b.attdba  ipstr='0279b 0 +351.609986  +1.462978 2015/03:12:17:11:56'
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0280a/o0280a.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0280a/o0280a.attdba  ipstr='0280a 0 +356.772020  -1.603976 2015/03:17:06:02:36'
# skipping 0281
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
# skipping 0300
# skipping 0300a
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
IBEX_ID=id-leops scr_inert.sh update arc=true \
    /home/ibexops/IBEX/raw/o0355/IBEX_2015_257_o0300a_Iner_Maneuver_v001.scr
Created file: science_arcs.txt
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
# skipping 0245
# skipping 0246
# skipping 0247
# skipping 0248
# skipping 0249
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
# skipping 0260
# skipping 0261
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
# skipping 0270
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
# skipping 0281
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
# skipping 0300
# skipping 0300a
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0300b/o0300b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0300b/o0300b.attdba  ipstr='0300b 0 +173.885001  +2.007023 2015/09:19:16:28:00'
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
Reprocessing previous orbit ATS file(s)
IBEX_ID=id-leops scr_inert.sh update \
    /home/ibexops/IBEX/raw/o0297/IBEX_2015_248_o0299a_v000.scr /home/ibexops/IBEX/raw/o0297/IBEX_2015_248_o0299a_v001.scr /home/ibexops/IBEX/raw/o0355/IBEX_2015_248_o0299a_v001.scr
Adding momentum axis pointing results to inertial_pointing.better
using osbdba and attdba files in odir = /home/ibexops/IBEX/id-leops/orbit
# skipping 0128
# skipping 0133
# skipping 0134
# skipping 0136
# skipping 0138
# skipping 0141
# skipping 0142
# skipping 0143
# skipping 0144
# skipping 0148
# skipping 0149
# skipping 0150
# skipping 0151
# skipping 0152
# skipping 0154
# skipping 0155
# skipping 0158
# skipping 0161
# skipping 0162
# skipping 0163
# skipping 0165
# skipping 0166
# skipping 0169
# skipping 0172
# skipping 0174
# skipping 0175
# skipping 0176
# skipping 0179
# skipping 0184
# skipping 0186
# skipping 0188
# skipping 0190
# skipping 0191
# skipping 0192
# skipping 0194
# skipping 0195
# skipping 0196
# skipping 0198
# skipping 0199
# skipping 0201
# skipping 0203
# skipping 0205
# skipping 0206
# skipping 0208
# skipping 0210
# skipping 0211
# skipping 0212
# skipping 0213
# skipping 0214
# skipping 0217
# skipping 0221
# skipping 0223
# skipping 0224
# skipping 0225
# skipping 0228
# skipping 0230
# skipping 0231
# skipping 0232
# skipping 0234
# skipping 0237
# skipping 0238
# skipping 0239
# skipping 0240
# skipping 0241
# skipping 0242
# skipping 0243
# skipping 0244
# skipping 0245
# skipping 0246
# skipping 0247
# skipping 0248
# skipping 0249
# skipping 0250
# skipping 0251
# skipping 0252
# skipping 0253
# skipping 0254
# skipping 0260
# skipping 0261
# skipping 0262
# skipping 0263
# skipping 0266
# skipping 0269
# skipping 0270
# skipping 0272
# skipping 0273
# skipping 0275
# skipping 0276
# skipping 0277
# skipping 0278
# skipping 0281
# skipping 0283
# skipping 0284
# skipping 0285
# skipping 0286
# skipping 0289
# skipping 0290
# skipping 0291
# skipping 0292
# skipping 0293
# skipping 0295
# skipping 0297
# skipping 0299
nep_check -r inertial_pointing.bettermomtemp -d /home/ibexops/IBEX/id-leops/orbit/o0299b/o0299b.osbdba -a /home/ibexops/IBEX/id-leops/orbit/o0299b/o0299b.attdba  ipstr='0299b 0 +165.560968  +5.535014 2015/09:09:19:02:31'
# skipping 0300
# skipping 0300a
# skipping 0302
# skipping 0303
# skipping 0303a
# skipping 0303b
# skipping 0304
# skipping 0308
# skipping 0309
# skipping 0310
# skipping 0311
# skipping 0312
# skipping 0313
# skipping 0314
# skipping 0315
# skipping 0316
# skipping 0316a
# skipping 0316b
# skipping 0317
# skipping 0318
# skipping 0319
# skipping 0320
# skipping 0321
# skipping 0322
# skipping 0323
# skipping 0324
# skipping 0326
# skipping 0327
# skipping 0328
# skipping 0329
# skipping 0330
# skipping 0331
# skipping 0334
# skipping 0335
# skipping 0336
# skipping 0338a
# skipping 0338b
# skipping 0339
# skipping 0340
# skipping 0341
# skipping 0342
# skipping 0343
# skipping 0344
# skipping 0345
# skipping 0346
# skipping 0348
# skipping 0349
# skipping 0351
# skipping 0352
# skipping 0353
# skipping 0354
# skipping 0354a
# skipping 0354b
# skipping 0355
# skipping 0355a
# skipping 0355b
# skipping 0356
# skipping 0356a
# skipping 0356b
# skipping 0357
Done.
Updating IBEX_Orbit text kernel:
done.
IBEX_ID=id-leops scr_inert.sh update arc=true \
    /home/ibexops/IBEX/raw/o0355/IBEX_2015_058_o0278a_v001.scr
Created file: science_arcs.txt
Updating IBEX_Orbit text kernel:
done.
Reprocessing previous orbit ATS file(s)
IBEX_ID=id-leops scr_inert.sh update \
    /home/ibexops/IBEX/raw/o0275/IBEX_2015_049_o0277a_v001.scr /home/ibexops/IBEX/raw/o0355/IBEX_2015_049_o0277a_v001.scr
IBEX_ID=id-leops scr_inert.sh update arc=true \
    /home/ibexops/IBEX/raw/o0355/IBEX_2015_257_o0300a_comm_v001.scr
Reprocessing previous orbit ATS file(s)
IBEX_ID=id-leops scr_inert.sh update \
    /home/ibexops/IBEX/raw/o0297/IBEX_2015_248_o0299a_v000.scr /home/ibexops/IBEX/raw/o0297/IBEX_2015_248_o0299a_v001.scr /home/ibexops/IBEX/raw/o0355/IBEX_2015_248_o0299a_v001.scr
IBEX_ID=id-leops scr_inert.sh update arc=true \
    /home/ibexops/IBEX/raw/o0355/IBEX_2015_139_o0287a_hgc_v001.scr
Reprocessing previous orbit ATS file(s)
IBEX_ID=id-leops scr_inert.sh update \
    /home/ibexops/IBEX/raw/o0284/IBEX_2015_130_o0286a_v002.scr /home/ibexops/IBEX/raw/o0284/IBEX_2015_130_o0286a_v001.scr /home/ibexops/IBEX/raw/o0355/IBEX_2015_130_o0286a_v002.scr /home/ibexops/IBEX/raw/o0355/IBEX_2015_130_o0286a_v001.scr
IBEX_ID=id-leops scr_inert.sh update arc=true \
    /home/ibexops/IBEX/raw/o0355/IBEX_2015_230_o0297a_v001.scr
Reprocessing previous orbit ATS file(s)
IBEX_ID=id-leops scr_inert.sh update \
    /home/ibexops/IBEX/raw/o0294/IBEX_2015_220_o0296a_v001.scr /home/ibexops/IBEX/raw/o0355/IBEX_2015_220_o0296a_v001.scr
IBEX_ID=id-leops scr_inert.sh update arc=true \
    /home/ibexops/IBEX/raw/o0355/IBEX_2015_021_o0274a_HGC_V001.scr
%%% /home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/ephem_wakeup.sh :
%%% /home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/telem_wakeup.sh :
%%% /home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/hvsci_wakeup.sh :
%%% /home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/forecast_wakeup.sh :
%%% /home/ibexops/IBEX/sw/isoc/src/ops/admin/scripts/usnsh_wakeup.sh :
No raw directory /home/ibexops/IBEX/raw/o

TA: 2017.035.08.00.18