[Isocops] v003 request : IBEX Orbit# 326 ATS Approval v002 (8 May 16 - 17 May 16)

Wed Apr 27 12:47:45 EDT 2016

Chelle, 

Sigh... 

I just looked at the ISOC projections. We don't have a projection for orbit 326 yet but currently the projection is saying orbit 325 will end at around block 102000. Our dumps are about 32000 blocks now; that would make us wrap-around sometime in orbit 326. We will get the orbit 324 dump tomorrow. The ISOC will have an updated projection then... 

Ken 

----- Original Message -----

From: "Michelle Reno" <mreno at swri.edu> 
To: "Perry.Tim" <tim.perry at orbitalatk.com>, "Wesley.Sheral" <sheral.wesley at orbitalatk.com>, "David Heirtzler" <dheirtzl at atlas.sr.unh.edu>, "IBEX-FDG" <IBEX.fdg at applieddefense.com>, "IBEXOPS" <IBEXOPS at gmail.com>, "ISOC" <isocops at lists.sr.unh.edu>, "Ken Fairchild" <fair-play at comcast.net>, "Lockwood.Robert" <robert.lockwood at orbitalatk.com>, "Nigel Angold" <nigel.angold at nasa.gov>, "Paul Janzen" <paul.janzen at umontana.edu>, "Tyler.Ryan" <ryan.tyler at orbitalatk.com> 
Sent: Wednesday, April 27, 2016 11:55:54 AM 
Subject: v003 request : IBEX Orbit# 326 ATS Approval v002 (8 May 16 - 17 May 16) 

In version 3 please include the SSR Pointer Reset commands as well : 

# Orbit# 326 PERIGEE: APL-18 SSR_Dump/Tracking Contact 
@ECT_SetRelay stx,on $TIME=2016/05:17:20:58:00 
@FMI_SetDownlink2K $TIME=2016/05:17:20:58:02 
@FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2016/05:17:20:58:04 
@FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2016/05:17:20:58:06 
@FMI_SetDownlink320K $TIME=2016/05:17:21:05:00 
@CEU_SSR_DUMP_NEW $TIME=2016/05:17:21:10:00 

@CEU_SSR_SET_WRT_PTR 6500 $TIME=2016/05:17:21:10:02 
@CEU_SSR_SET_RD_PTR 6500 $TIME=2016/05:17:21:10:04 

@ECT_SetRelay stx,off $TIME=2016/05:17:22:02:00 

-- 
Chelle Reno 
IBEX Mission Operations Manager 
J uno/JADE Deputy Project Manager 
Austin Mission Consulting 
(210) 478-7337 

From: Perry.Tim [tim.perry at orbitalatk.com] 
Sent: Wednesday, April 27, 2016 8:20 AM 
To: Wesley.Sheral; David Heirtzler; IBEX-FDG; IBEXOPS; ISOC; Ken Fairchild; Lockwood.Robert; Reno, Michelle; Nigel Angold; Paul Janzen; Tyler.Ryan 
Subject: RE: IBEX Orbit# 326 ATS Approval v002 (8 May 16 - 17 May 16) 

Can we get a version 3 with the corrected times? 

@CEU_SSR_DUMP_NEW $TIME=2016/05:17:21:10:00 

@ECT_SetRelay stx,off $TIME=2016/05:17:20:02:00 

From: Wesley.Sheral 
Sent: Wednesday, April 27, 2016 9:13 AM 
To: Wesley.Sheral; David Heirtzler; IBEX-FDG; IBEXOPS; ISOC; Ken Fairchild; Lockwood.Robert; Michelle Reno; Nigel Angold; Paul Janzen; Perry.Tim; Tyler.Ryan 
Subject: IBEX Orbit# 326 ATS Approval v002 (8 May 16 - 17 May 16) 

Guys, 

Here is v002 of the ATS for approval. 

The APL contact times were corrected 

Sheral R. Wesley 

IBEX Mission OPS 

CRS/CYGNUS Mission Planning 

Bldg. 2 Room 1337 

Office (703) 406-5641 

Cell (202) 236-0802 

From: Wesley.Sheral 
Sent: Tuesday, April 26, 2016 3:26 AM 
To: David Heirtzler; IBEX-FDG; IBEXOPS; ISOC; Ken Fairchild; Lockwood.Robert; Michelle Reno; Nigel Angold; Paul Janzen; Perry.Tim; Tyler.Ryan; Wesley.Sheral 
Subject: IBEX Orbit# 326 ATS Approval (8 May 16 - 17 May 16) 

Guys, 

Here are the planning files and ATS for Orbit# 326. 

Please respond to this email thread with your comments, and approvals 

Approvals are required before 28 Apr 16 @1100 UTC. 

Note the following: 

1. No Battery Balancing commands 

2. APL-18 SSR_Dump commands were manually inserted because they straddled the 14re ASC crossing time 

3. Moon in Lo FOV Commands 

2016-05-13T11:33:24.289Z,MoonInLoFovStart,orbit:326 

2016-05-14T17:39:40.942Z,MoonInLoFovStop,orbit:326 

4. No Ascending SetSpinPulseProtectEnable Enable Commands 

5. Command Load Constraint Violation Report 

IBEX_2016_129_o0326a_Recovery_v001.scr 

========================== 

HARD CONSTRAINT VIOLATIONS 

========================== 

NO VIOLATIONS. 

========================== 

SOFT CONSTRAINT VIOLATIONS 

========================== 

IBX-CLC-006: Planned transmission at 2016/05/17 04:28:00 UTC - 2016/05/17 

06:02:00 UTC exceeds the maximum contiguous transmission time of 

5400 seconds 

*IBEX,AUWA01,ADD,05/17/16,138,04:30:00,05/17/16,138,06:00:00,,LAHO 64K IBEX Orbit# 326 Tracking Contact 

* CSS and CEU Spin Period Contact 

IBX-CLC-016: No command to enable spin pulse protection was found after 

transition to science mode at 2016/05/08 11:34:23 UTC 

IBX-CLC-016: No command to enable spin pulse protection was found after 

transition to science mode at 2016/05/12 20:35:16 UTC 

============== 

OTHER MESSAGES 

============== 

NO MESSAGES. 

Sheral R. Wesley 

IBEX Mission OPS 

CRS/CYGNUS Mission Planning 

Bldg. 2 Room 1337 

Office (703) 406-5641 

Cell (202) 236-0802 

Notice: This e-mail is intended solely for use of the individual or entity to which it is addressed and may contain information that is proprietary, privileged and exempt from disclosure under applicable law. If the reader is not the intended recipient or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. This communication may also contain data subject to U.S. export laws. If so, that data subject to the International Traffic in Arms Regulation cannot be disseminated, distributed or copied to foreign nationals, residing in the U.S. or abroad, absent the express prior approval of the U.S. Department of State. If you have received this communication in error, please notify the sender by reply e-mail and destroy the e-mail message and any physical copies made of the communication. Thank you. 
********** ********** 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sr.unh.edu/pipermail/isocops/attachments/20160427/7748857c/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2392 bytes
Desc: image001.jpg
URL: <http://lists.sr.unh.edu/pipermail/isocops/attachments/20160427/7748857c/image001-0001.jpg>