[Isocops] BEX Orbit# 118 ATS (20 Mar 11 - 28 Mar 11) v003
Ibex Mission Operations
ibexops at gmail.com
Fri Mar 11 09:12:26 EST 2011
The ATS for ORbit # 118 has been changed. The following deleted commands
are listed below
# Orbit# 118 APL/Link-Margin Apogee Contact
@ECT_SetRelay stx,on $TIME=2011/03:23:15:58:00
@FMI_SetDownlink2K $TIME=2011/03:23:15:58:02
@FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON
$TIME=2011/03:23:15:58:04
@FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2011/03:23:15:58:06
@ECT_SetRelay stx,off $TIME=2011/03:23:16:47:00
On Fri, Mar 11, 2011 at 8:01 AM, Tim Perry <Perry.Tim at orbital.com> wrote:
> The APL contact for March 23 @1600 was also deleted yesterday, so I think
> we need to remove those commands also...
>
> Timothy E. Perry
> IBEX, GEMS Mission Ops Lead
> Orbital Sciences Corp
> Space Systems Group
> Office: (703) 406-5976
> Cell: (301) 606-1430
> perry.tim at orbital.com
>
>
>
> From: Ibex Mission Operations <ibexops at gmail.com>
>
> To: "Reno, Michelle" <mreno at swri.edu>
>
> Cc: Bret Hautamaki <hautamaki.bret at orbital.com>, IBEX-FDG <
> IBEX.fdg at applieddefense.com>, "IBEXOPS/ORB" <IBEXops at orbital.com>, ISOC
> at New Hampshire <isocops at lists.sr.unh.edu>, John Cavallo <
> cavallo.john at orbital.com>, Mark Tapley <mark.tapley at swri.org>, Robert
> Lockwood <Lockwood.Robert at orbital.com>, Roland Vanderspek <
> rvdspek at bu.edu>, Ryan Tyler <tyler.ryan at orbital.com>, Sheral Wesley
> <wesley.sheral at orbital.com>, Thomas Regiec <
> regiec.thomas at orbital.com>, Tim Perry <perry.tim at orbital.com>, Walker
> Cross
> <Cross.Walker at orbital.com>
>
> Date: 03/10/2011 01:40 PM
>
> Subject: IBEX Orbit# 118 ATS (20 Mar 11 - 28 Mar 11) v002
>
>
>
>
>
>
> V002 of the Orbit# 118 ATS has been submitted for your approval.
> The following commands were removed. If needed, the contact will be a
> Blind Acquisition.
>
> # Orbit# 117 Post Burn Back-Up Contact
> @ECT_SetRelay stx,on $TIME=2011/03:24:20:28:00
> @FMI_SetDownlink2K $TIME=2011/03:24:20:28:02
> @FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON
> $TIME=2011/03:24:20:28:04
> @FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2011/03:24:20:28:06
> @ECT_SetRelay stx,off $TIME=2011/03:24:21:07:00
> On Thu, Mar 10, 2011 at 1:31 PM, Reno, Michelle <mreno at swri.edu> wrote:
> Hey Sheral, Let's remove the commands associated with the Post-Burn Pass:
> Upload P/L Commands contact @
>
> 2011/03:24:20:28:00
>
> since we will likely cancel it (if our pointing looks good). If we need
> it we can do a blind Acq.
>
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Chelle Reno
> Austin Mission Consulting
> (210) 478-7337 (c)
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> From: isocops-bounces at lists.sr.unh.edu on behalf of Ibex Mission
> Operations
> Sent: Thu 3/10/2011 10:59 AM
> To: Bret Hautamaki; IBEX-FDG; IBEXOPS/ORB; ISOC at New Hampshire; John
> Cavallo; Mark Tapley; Robert Lockwood; Roland Vanderspek; Ryan Tyler;
> Sheral Wesley; Thomas Regiec; Tim Perry; Walker Cross
> Subject: [Isocops] IBEX Orbit# 118 ATS (20 Mar 11 - 28 Mar 11)
>
> Guys,
> Here is the ATS for Orbit# 118 which includes the sun precession
> maneuver from Orbit# 117.
> Please review the ATS/planning files and forward all comments/approvals
> to this email by COB Friday 11 Mar 11.
>
> We are still in HOUSEKEEPING from the conclusion of the Orbit# 117
> command load @FCT_SetScState housekeeping $TIME=2011/03:20:08:43:30
> # 14 Re Asc 20 Mar 11 @22:48:00 UTC
> # Burn duration is 15 minutes
>
>
> NO VIOLATIONS.
> ==========================
> SOFT CONSTRAINT VIOLATIONS
> ==========================
> NO VIOLATIONS.
> ==============
> OTHER MESSAGES
> ==============
> IBX-CLC-003W: Payload mode unknown during interval 2011/03/20 22:48:00
> UTC -
> 2011/03/20 23:03:00 UTC, which overlaps 5N thruster
> maneuver at
> 2011/03/20 22:48:00 UTC - 2011/03/20 23:03:00 UTC
> IBX-CLC-009W: Payload mode unknown during interval 2011/03/20 14:00:00
> UTC -
> 2011/03/20 19:43:51 UTC, which overlaps times when IBEX is
> under
> 10 RE at 2011/03/20 14:00:00 UTC - 2011/03/20 19:43:51 UTC
> *The following commands were moved back until after the sun precession
> maneuver was completed
> @ACT_SetSpinPulseProtectEnable Disable $TIME=2011/03:20:23:07:00
> @FCT_SetScState science $TIME=2011/03:20:23:08:00
> @ACT_SetSpinPulseProtectEnable Enable $TIME=2011/03:20:23:09:00
> @CEU_LO_SCIENCE_MODE NORMAL $TIME=2011/03:20:23:10:00
>
> --
> Sheral R. Wesley
> SPVR., Satellite Operations
> IBEX Mission OPS
> (304) 279-6678
>
>
>
> --
> Sheral R. Wesley
> SPVR., Satellite Operations
> IBEX Mission OPS
> (304) 279-6678[attachment "IBEX_2011_079_00_00_v002.txt" deleted by Tim
> Perry/ORBVA]
>
>
>
> -----------------------------------------
> Notice: This e-mail is intended solely for use of the individual
> or entity to which it is addressed and may contain information that
> is proprietary, privileged and exempt from disclosure under
> applicable law. If the reader is not the intended recipient or
> agent responsible for delivering the message to the intended
> recipient, you are hereby notified that any dissemination,
> distribution or copying of this communication is strictly
> prohibited. This communication may also contain data subject to
> U.S. export laws. If so, that data subject to the International
> Traffic in Arms Regulation cannot be disseminated, distributed or
> copied to foreign nationals, residing in the U.S. or abroad, absent
> the express prior approval of the U.S. Department of State. If
> you have received this communication in error, please notify the
> sender by reply e-mail and destroy the e-mail message and any
> physical copies made of the communication. Thank you.
>
--
Sheral R. Wesley
SPVR., Satellite Operations
IBEX Mission OPS
(304) 279-6678
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.sr.unh.edu/mailman/private/isocops/attachments/20110311/79c666f9/attachment-0001.html
-------------- next part --------------
; Filename: IBEX_2011_079_00_00_v003.scr
; File type: MAESTRO Absolute Time Sequence Script (ATS)
;
; Create time: 2011/069.155214
; Plan period start: 2011/079.140000
; Plan period stop: 2011/087.100000
; Default time format: UTC
;
; Input files: 5
; IBEX_2011_Orbit118_v001.oef
; IBEX_2011_079_19_43_v002.stf
; IBEX_2011_Forecast_08Mar11-15Jun11_v001.sap
; IBEX_2011_Orbit118_v003.caf
; Sun_procession_mnvr_Orbit117_v001.abs
; ATS_CMD_TIME_OFFSET = 0
script ats_2011_03_20_14_00_00()
begin
# We are still in HOUSEKEEPING from the conclusion of the Orbit# 117 command load @FCT_SetScState housekeeping $TIME=2011/03:20:08:43:30
# 14 Re Desc 20 Mar 11 @22:48:00 UTC
# Burn duration is 15 minutes
@ECT_SetHTRCmd CATBED_5N_HTR,ON $TIME=2011/03:20:21:53:00
@FCT_SetFcMode burn $TIME=2011/03:20:22:45:00
@ACT_SetLrTarget ACS_SUN $TIME=2011/03:20:22:47:00
@ACT_SetThrustTime 900 $TIME=2011/03:20:22:47:55
@ACT_SetThrustEnable ENABLE $TIME=2011/03:20:22:48:00
@ACT_SetThrustEnable DISABLE $TIME=2011/03:20:23:03:00
@ECT_SetHTRCmd CATBED_5N_HTR,OFF $TIME=2011/03:20:23:03:00
@ACT_SetThrustTime 0 $TIME=2011/03:20:23:03:30
@FCT_SetFcMode Mission $TIME=2011/03:20:23:04:00
@ACT_SetSpinPulseProtectEnable Disable $TIME=2011/03:20:23:07:00
@FCT_SetScState science $TIME=2011/03:20:23:08:00
@ACT_SetSpinPulseProtectEnable Enable $TIME=2011/03:20:23:09:00
@CEU_LO_SCIENCE_MODE NORMAL $TIME=2011/03:20:23:10:00
# Orbit# 118 Ascending Payload Commands
@CEU_MACRO_EXEC ASCENDING_PL1 $TIME=2011/03:20:23:36:58
@CEU_MACRO_EXEC ASCENDING_HI $TIME=2011/03:20:23:37:14
@CEU_MACRO_EXEC ASCENDING_PL2 $TIME=2011/03:20:23:48:08
@CEU_MACRO_EXEC ASCENDING_PL1 $TIME=2011/03:20:23:50:13
@CEU_MACRO_EXEC ASCENDING_LO $TIME=2011/03:20:23:50:29
@CEU_MACRO_EXEC ASCENDING_PL2 $TIME=2011/03:20:23:58:49
# Orbit# 117 Post Burn Contact
@ECT_SetRelay stx,on $TIME=2011/03:21:17:08:00
@FMI_SetDownlink2K $TIME=2011/03:21:17:08:02
@FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2011/03:21:17:08:04
@FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2011/03:21:17:08:06
@ECT_SetRelay stx,off $TIME=2011/03:21:17:47:00
# Orbit# 117 Post Burn Contact
@ECT_SetRelay stx,on $TIME=2011/03:23:14:53:00
@FMI_SetDownlink2K $TIME=2011/03:23:14:53:02
@FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2011/03:23:14:53:04
@FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2011/03:23:14:53:06
@ECT_SetRelay stx,off $TIME=2011/03:23:15:32:00
# Orbit# 118 Descending Payload Commands
@CEU_MACRO_EXEC DESCENDING_PL1 $TIME=2011/03:27:02:15:08
@CEU_MACRO_EXEC DESCENDING_LO $TIME=2011/03:27:02:15:50
@CEU_MACRO_EXEC ASCENDING_PL2 $TIME=2011/03:27:02:24:12
@CEU_MACRO_EXEC DESCENDING_PL1 $TIME=2011/03:27:02:26:17
@CEU_MACRO_EXEC DESCENDING_HI $TIME=2011/03:27:02:26:59
@CEU_MACRO_EXEC DESCENDING_PL2 $TIME=2011/03:27:02:37:18
# Orbit# 118 Tracking Contact
@ECT_SetRelay stx,on $TIME=2011/03:27:15:29:26
@FMI_SetDownlink2K $TIME=2011/03:27:15:29:28
@FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2011/03:27:15:29:30
@FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2011/03:27:15:29:32
@ECT_SetRelay stx,off $TIME=2011/03:27:16:08:26
# Orbit# 118 Inertial Maneuver Contact
@ECT_SetHTRCmd CATBED_5N_HTR,ON $TIME=2011/03:27:18:06:22
@FCT_SetScState housekeeping $TIME=2011/03:27:18:31:22
@ACT_SetKFInputSelect GND_CMD, 0, 0, 0, 0 $TIME=2011/03:27:18:51:22
@ACT_SetEstUpdateEnables ENABLE, DISABLE $TIME=2011/03:27:18:51:23
@FCT_SetFcMode burn $TIME=2011/03:27:18:58:22
@ACT_SetInrDir 0.9906740026867388,0.12497113656152499,0.05428844653474853 $TIME=2011/03:27:18:59:22
@ACT_SetLrTarget ACS_INERTIAL $TIME=2011/03:27:19:00:22
@ACT_SetThrustTime 960 $TIME=2011/03:27:19:01:17
@ACT_SetThrustEnable ENABLE $TIME=2011/03:27:19:01:22
@ACT_SetThrustEnable DISABLE $TIME=2011/03:27:19:16:22
@ECT_SetHTRCmd CATBED_5N_HTR,OFF $TIME=2011/03:27:19:16:23
@ACT_SetThrustTime 0 $TIME=2011/03:27:19:16:52
@ACT_SetStaticZrate ESTIMATOR, 0.418 $TIME=2011/03:27:19:31:32
@ACT_SetKFInputSelect STA_PCT_VALID, 85,18,23,90 $TIME=2011/03:27:19:31:42
@FCT_SetFcMode Mission $TIME=2011/03:27:19:32:22
## Orbit# 118 Battery Call Balancing 6_re Desc
@ECT_SetLongEclipseFlag TRUE $TIME=2011/03:27:21:00:00
@ECT_SetLongEclipseFlag FALSE $TIME=2011/03:27:22:30:00
# Orbit # 118 SSR-Dump/Tracking Contact
@ECT_SetRelay stx,on $TIME=2011/03:28:03:58:00
@FMI_SetDownlink320K $TIME=2011/03:28:03:58:02
@FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2011/03:28:03:58:04
@FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2011/03:28:03:58:06
@ECT_SetRelay stx,off $TIME=2011/03:28:04:37:00
end
More information about the Isocops
mailing list