[Isocops] IBEX Orbit# 118 ATS (20 Mar 11 - 28 Mar 11) v002

Ibex Mission Operations ibexops at gmail.com
Thu Mar 10 13:39:51 EST 2011


V002 of the Orbit# 118 ATS has been submitted for your approval.
The following commands were removed.  If needed, the contact will be a Blind
Acquisition.

# Orbit# 117 Post Burn Back-Up Contact
  @ECT_SetRelay stx,on $TIME=2011/03:24:20:28:00
  @FMI_SetDownlink2K $TIME=2011/03:24:20:28:02
  @FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON
$TIME=2011/03:24:20:28:04
  @FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2011/03:24:20:28:06
  @ECT_SetRelay stx,off $TIME=2011/03:24:21:07:00
On Thu, Mar 10, 2011 at 1:31 PM, Reno, Michelle <mreno at swri.edu> wrote:

>   Hey Sheral, Let's remove the commands associated with the Post-Burn
> Pass: Upload P/L Commands contact @
>
> 2011/03:24:20:28:00
>
> since we will likely cancel it (if our pointing looks good). If we need it
> we can do a blind Acq.
>
>
> *~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
> *
> Chelle Reno
> Austin Mission Consulting
> (210) 478-7337 (c)*
> *~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
>
> ------------------------------
> *From:* isocops-bounces at lists.sr.unh.edu on behalf of Ibex Mission
> Operations
> *Sent:* Thu 3/10/2011 10:59 AM
> *To:* Bret Hautamaki; IBEX-FDG; IBEXOPS/ORB; ISOC at New Hampshire; John
> Cavallo; Mark Tapley; Robert Lockwood; Roland Vanderspek; Ryan Tyler; Sheral
> Wesley; Thomas Regiec; Tim Perry; Walker Cross
> *Subject:* [Isocops] IBEX Orbit# 118 ATS (20 Mar 11 - 28 Mar 11)
>
>   Guys,
>     Here is the ATS for Orbit# 118 which includes the sun precession
> maneuver from Orbit# 117.
> Please review the ATS/planning files and forward all comments/approvals to
> this email by COB Friday 11 Mar 11.
>
>  We are still in *HOUSEKEEPING* from the conclusion of the Orbit# 117
> command load  *@FCT_SetScState housekeeping $TIME=2011/03:20:08:43:30
> *#  14 Re Asc  20 Mar 11  @22:48:00 UTC
> #  Burn duration is 15 minutes
>
>
> NO VIOLATIONS.
> ==========================
> SOFT CONSTRAINT VIOLATIONS
> ==========================
> NO VIOLATIONS.
> ==============
> OTHER MESSAGES
> ==============
> IBX-CLC-003W: Payload mode unknown during interval 2011/03/20 22:48:00 UTC
> -
>               2011/03/20 23:03:00 UTC, which overlaps 5N thruster maneuver
> at
>               2011/03/20 22:48:00 UTC - 2011/03/20 23:03:00 UTC
> IBX-CLC-009W: Payload mode unknown during interval 2011/03/20 14:00:00 UTC
> -
>               2011/03/20 19:43:51 UTC, which overlaps times when IBEX is
> under
>               10 RE at 2011/03/20 14:00:00 UTC - 2011/03/20 19:43:51 UTC
> *The following commands were moved back until after the sun precession
> maneuver was completed
>   @ACT_SetSpinPulseProtectEnable Disable $TIME=2011/03:20:23:07:00
>   @FCT_SetScState science $TIME=2011/03:20:23:08:00
>   @ACT_SetSpinPulseProtectEnable Enable $TIME=2011/03:20:23:09:00
>   @CEU_LO_SCIENCE_MODE NORMAL $TIME=2011/03:20:23:10:00
>
> --
> Sheral R. Wesley
> SPVR., Satellite Operations
> IBEX Mission OPS
> (304) 279-6678
>



-- 
Sheral R. Wesley
SPVR., Satellite Operations
IBEX Mission OPS
(304) 279-6678
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.sr.unh.edu/mailman/private/isocops/attachments/20110310/2d6962bf/attachment.html 
-------------- next part --------------
; Filename:            IBEX_2011_079_00_00_v002.scr
; File type:           MAESTRO Absolute Time Sequence Script (ATS)
;
; Create time:         2011/069.155214
; Plan period start:   2011/079.140000
; Plan period stop:    2011/087.100000
; Default time format: UTC
;
; Input files:         5
;   IBEX_2011_Orbit118_v001.oef
;   IBEX_2011_079_19_43_v002.stf
;   IBEX_2011_Forecast_08Mar11-15Jun11_v001.sap
;   IBEX_2011_Orbit118_v003.caf
;   Sun_procession_mnvr_Orbit117_v001.abs
; ATS_CMD_TIME_OFFSET = 0
script ats_2011_03_20_14_00_00()
begin
#  We are still in HOUSEKEEPING from the conclusion of the Orbit# 117 command load  @FCT_SetScState housekeeping $TIME=2011/03:20:08:43:30
#  14 Re Desc  20 Mar 11  @22:48:00 UTC
#  Burn duration is 15 minutes
  
  @ECT_SetHTRCmd CATBED_5N_HTR,ON $TIME=2011/03:20:21:53:00
  @FCT_SetFcMode burn $TIME=2011/03:20:22:45:00
  @ACT_SetLrTarget ACS_SUN $TIME=2011/03:20:22:47:00
  @ACT_SetThrustTime 900 $TIME=2011/03:20:22:47:55
  @ACT_SetThrustEnable ENABLE $TIME=2011/03:20:22:48:00
  @ACT_SetThrustEnable DISABLE $TIME=2011/03:20:23:03:00
  @ECT_SetHTRCmd CATBED_5N_HTR,OFF $TIME=2011/03:20:23:03:00
  @ACT_SetThrustTime 0 $TIME=2011/03:20:23:03:30
  @FCT_SetFcMode Mission $TIME=2011/03:20:23:04:00
  
  @ACT_SetSpinPulseProtectEnable Disable $TIME=2011/03:20:23:07:00
  @FCT_SetScState science $TIME=2011/03:20:23:08:00
  @ACT_SetSpinPulseProtectEnable Enable $TIME=2011/03:20:23:09:00
  @CEU_LO_SCIENCE_MODE NORMAL $TIME=2011/03:20:23:10:00

#  Orbit# 118 Ascending Payload Commands  
  @CEU_MACRO_EXEC ASCENDING_PL1 $TIME=2011/03:20:23:36:58
  @CEU_MACRO_EXEC ASCENDING_HI $TIME=2011/03:20:23:37:14
  @CEU_MACRO_EXEC ASCENDING_PL2 $TIME=2011/03:20:23:48:08
  @CEU_MACRO_EXEC ASCENDING_PL1 $TIME=2011/03:20:23:50:13
  @CEU_MACRO_EXEC ASCENDING_LO $TIME=2011/03:20:23:50:29
  @CEU_MACRO_EXEC ASCENDING_PL2 $TIME=2011/03:20:23:58:49
  
#  Orbit# 117 Post Burn Contact  
  @ECT_SetRelay stx,on $TIME=2011/03:21:17:08:00
  @FMI_SetDownlink2K $TIME=2011/03:21:17:08:02
  @FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2011/03:21:17:08:04
  @FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2011/03:21:17:08:06
  @ECT_SetRelay stx,off $TIME=2011/03:21:17:47:00
  
#  Orbit# 117 Post Burn Contact  
  @ECT_SetRelay stx,on $TIME=2011/03:23:14:53:00
  @FMI_SetDownlink2K $TIME=2011/03:23:14:53:02
  @FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2011/03:23:14:53:04
  @FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2011/03:23:14:53:06
  @ECT_SetRelay stx,off $TIME=2011/03:23:15:32:00
  
#  Orbit# 118 APL/Link-Margin Apogee Contact  
  @ECT_SetRelay stx,on $TIME=2011/03:23:15:58:00
  @FMI_SetDownlink2K $TIME=2011/03:23:15:58:02
  @FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2011/03:23:15:58:04
  @FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2011/03:23:15:58:06
  @ECT_SetRelay stx,off $TIME=2011/03:23:16:47:00
  
  
#  Orbit# 118 Descending Payload Commands  
  @CEU_MACRO_EXEC DESCENDING_PL1 $TIME=2011/03:27:02:15:08
  @CEU_MACRO_EXEC DESCENDING_LO $TIME=2011/03:27:02:15:50
  @CEU_MACRO_EXEC ASCENDING_PL2 $TIME=2011/03:27:02:24:12
  @CEU_MACRO_EXEC DESCENDING_PL1 $TIME=2011/03:27:02:26:17
  @CEU_MACRO_EXEC DESCENDING_HI $TIME=2011/03:27:02:26:59
  @CEU_MACRO_EXEC DESCENDING_PL2 $TIME=2011/03:27:02:37:18
  
#  Orbit# 118 Tracking Contact  
  @ECT_SetRelay stx,on $TIME=2011/03:27:15:29:26
  @FMI_SetDownlink2K $TIME=2011/03:27:15:29:28
  @FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2011/03:27:15:29:30
  @FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2011/03:27:15:29:32
  @ECT_SetRelay stx,off $TIME=2011/03:27:16:08:26
  
#  Orbit# 118 Inertial Maneuver Contact  
  @ECT_SetHTRCmd CATBED_5N_HTR,ON $TIME=2011/03:27:18:06:22
  @FCT_SetScState housekeeping $TIME=2011/03:27:18:31:22
  @ACT_SetKFInputSelect GND_CMD, 0, 0, 0, 0 $TIME=2011/03:27:18:51:22
  @ACT_SetEstUpdateEnables ENABLE, DISABLE $TIME=2011/03:27:18:51:23
  @FCT_SetFcMode burn $TIME=2011/03:27:18:58:22
  @ACT_SetInrDir 0.9906740026867388,0.12497113656152499,0.05428844653474853 $TIME=2011/03:27:18:59:22
  @ACT_SetLrTarget ACS_INERTIAL $TIME=2011/03:27:19:00:22
  @ACT_SetThrustTime 960 $TIME=2011/03:27:19:01:17
  @ACT_SetThrustEnable ENABLE $TIME=2011/03:27:19:01:22
  @ACT_SetThrustEnable DISABLE $TIME=2011/03:27:19:16:22
  @ECT_SetHTRCmd CATBED_5N_HTR,OFF $TIME=2011/03:27:19:16:23
  @ACT_SetThrustTime 0 $TIME=2011/03:27:19:16:52
  @ACT_SetStaticZrate ESTIMATOR, 0.418 $TIME=2011/03:27:19:31:32
  @ACT_SetKFInputSelect STA_PCT_VALID, 85,18,23,90 $TIME=2011/03:27:19:31:42
  @FCT_SetFcMode Mission $TIME=2011/03:27:19:32:22
  
## Orbit# 118 Battery Call Balancing  6_re Desc
  @ECT_SetLongEclipseFlag TRUE $TIME=2011/03:27:21:00:00
  @ECT_SetLongEclipseFlag FALSE $TIME=2011/03:27:22:30:00      
  
#  Orbit # 118 SSR-Dump/Tracking Contact  
  @ECT_SetRelay stx,on $TIME=2011/03:28:03:58:00
  @FMI_SetDownlink320K $TIME=2011/03:28:03:58:02
  @FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2011/03:28:03:58:04
  @FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2011/03:28:03:58:06
  @ECT_SetRelay stx,off $TIME=2011/03:28:04:37:00
end





More information about the Isocops mailing list