[Isocops] IBEX Goat Herder 21 Apr 11
Ibex Mission Operations
ibexops at gmail.com
Thu Apr 21 01:34:14 EDT 2011
Nominal Ascending Apogee Contact for Orbit# 122.
CAR# 456 (S924-OP31203) Enable Start Tracker and Estimator FDC after an ACE
Reset
1.Fill out Desired FDC state in the table in Appendix A. (The desired state
is that all ACS FDC should be Enabled.)
2. Run script FDC_enable_disable.scr
* All ACS FDC tests were enabled*
--
Sheral R. Wesley
SPVR., Satellite Operations
IBEX Mission OPS
(304) 279-6678
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.sr.unh.edu/mailman/private/isocops/attachments/20110421/bea08d5b/attachment.html
-------------- next part --------------
IBEX Goat Herder 21 Apr 11
Successful Orbit# 122 Ascending Apogee Contact.
CAR#CAR# 456 (S924-OP31203) Enable Start Tracker and Estimator FDC after an ACE Reset
1.Fill out Desired FDC state in the table in Appendix A. (The desired state is that all ACS FDC should be Enabled.)
2.Run script FDC_enable_disable.scr
* All ACS FDC tests were enabled*
Date
Wednesday, April 20, 2011
Jday Time Station Controller CAR1 CAR2 CAR3 Razor# USNPR# Radius S-Band Rate
110 1300 USHI02 TPerry 14 asc 320ksps
VC 0 VC 0 Seq Err VC 1 VC 1 Seq Err VC 2 VC 2 Seq Err PASS/FAIL
1166 0 1328 0 Pass
VC 2 Write Pointer Start 39374 VC 2 Write Pointer End 39417
VC 2 Read Pointer 38919 VC 2 Read Pointer End 38919
Dumped FC Back Orbit data
EB/NO readings @320k:
1258 = 8.14 - 9.03
1315 = 7.49 - 8.5
1333 = 8.14 - 8.96
Autotrack from 1320 - 1337
Sent ACS read commands 2X
Date
Thursday, April 21, 2011
Jday Time Station Controller CAR1 CAR2 CAR3 Razor# USNPR# Radius S-Band Rate
111 0300 AUWA SWesley 456 23 asc 40ksps
VC 0 VC 0 Seq Err VC 1 VC 1 Seq Err VC 2 VC 2 Seq Err PASS/FAIL
704 2 1454 31 Pass
VC 2 Write Pointer Start 40954 VC 2 Write Pointer End 41033
VC 2 Read Pointer 38919 VC 2 Read Pointer End 38919
Orbit# 122 Ascending Apogee Contact
@FTG_DumpBackOrbit (from start,0,0,0,0)
@ACT_TMEst
@ACT_TMSta
CAR# 456 (S924-OP31203) Enable Start Tracker and Estimator FDC after an ACE Reset
1.Fill out Desired FDC state in the table in Appendix A. (The desired state is that all ACS FDC should be Enabled.)
2. Run script FDC_enable_disable.scr
* All ACS FDC tests were enabled*
@0300 ebno=6.94 - 8.39 dbm (40ksps)
@0321 ebno=6.52 - 7.83 dbm (40ksps)
More information about the Isocops
mailing list