[Isocops] IBEX Orbit# 123 v001 ATS - approve

Mark Tapley mtapley at swri.edu
Mon Apr 18 18:19:08 EDT 2011


All,
	I have looked at the Orbit 123 ATS v001 
(IBEX_2011_118_00_00_v001.txt) and I approve.

	The portentious "PL mode unknown" constraint violation 
messages appear near the beginning of the orbit, as always. I worry 
more about this now than I used to. No other violations.

	The PL commands in the ATS v001 match the STF v001 file 
(IBEX_2011_118_04_23_v001.stf), per Ken's script (Thanks, Ken!).

	PL ascending and descending operations make sense WRT 15 Re 
ascending and descending times respectively.

	No Moon in -Lo FOV PMT setback commands, agreeing with the .oef.

	Ground station contact times match S/C transmitter-on times 
for all 3 contacts.

	No battery cell balancing this odd-numbered orbit.

	Inertial sun-pointing maneuver at the end of this orbit 
leaves us pointing safe directions at conclusion of the maneuver, at 
the following ascending time, and at the descending time following 
that (using 
http://ibex.unh.edu/ibexhome/doc/isoc/spice/isoc_orbits.html for the 
descending time, since no Forecast .oef).

[tapley at ena ~]$ ibex_rotate -o -u 
0.7027707363102871,0.6526960982877015,0.2830213692743152 -w ibex-sun 
-t 2011/05:05:06:46:57
Quaternion    +0.000000,+0.000000,+0.000000,+0.000000
  points axis  +1.000000,+0.000000,+0.000000
  towards ECI  +0.702771,+0.652696,+0.283021
  which is     R.A.  +42.884 Decl. +16.441
  missing      R.A.  +41.841 Decl. +16.115 (ibex-sun)
  error is     R.A.   +1.044 Decl.  +0.325
  for a total  1.053 deg
[tapley at ena ~]$ ibex_rotate -o -u 
0.7027707363102871,0.6526960982877015,0.2830213692743152 -w ibex-sun 
-t 2011-05-05T17:44:04.800Z
Quaternion    +0.000000,+0.000000,+0.000000,+0.000000
  points axis  +1.000000,+0.000000,+0.000000
  towards ECI  +0.702771,+0.652696,+0.283021
  which is     R.A.  +42.884 Decl. +16.441
  missing      R.A.  +42.291 Decl. +16.271 (ibex-sun)
  error is     R.A.   +0.593 Decl.  +0.169
  for a total  0.594 deg
[tapley at ena ~]$ ibex_rotate -o -u 
0.7027707363102871,0.6526960982877015,0.2830213692743152 -w ibex-sun 
-t 2011-05-12T21:28:04.800Z
Quaternion    +0.000000,+0.000000,+0.000000,+0.000000
  points axis  +1.000000,+0.000000,+0.000000
  towards ECI  +0.702771,+0.652696,+0.283021
  which is     R.A.  +42.884 Decl. +16.441
  missing      R.A.  +49.247 Decl. +18.166 (ibex-sun)
  error is     R.A.   +6.363 Decl.  +1.725
  for a total  6.315 deg

	No more O-mode.

	No overlap with Orbit122 commands, per 
http://ibex.unh.edu/cgi-bin/ats.cgi .

	On Command Approval Checklist, I verify the following boxes:

15 Re ASC Command Check (also includes -Hi commands to go to 1800 V on CEM 4)
Moon In Lo FOV
15 Re Desc Command Check
Battery Cell Balancing
Command Constraint Violation Report


At 15:44 -0400 4/15/11, Tim Perry wrote:
>All,
>    Attached are the files for Orbit #123. The ATS will be uplinked during
>the contacts on April 20.
>      Enjoy
>           Tim

-- 
						- Mark     210-379-4635
-----------------------------------------------------------------------
Large Asteroids headed toward planets
inhabited by beings that don't have
technology adequate to stop them:

				Think of it as Evolution in Fast-Forward.


More information about the Isocops mailing list