Guys,
I have attached v002 of the ATS.
APL-18 just confirmed the SSR_Dump/Tracking contact, and the commands were added in
Sheral R. Wesley
Sr Systems Engineer
IBEX Mission OPS
CRS/CYGNUS Mission Planning
Bldg. 2 Room 1337
Office (703) 406-5641
Cell (202) 236-0802
From: Wesley, Sheral
Sent: Thursday, May 11, 2017 12:07 PM
To: David Heirtzler; IBEX-FDG; IBEXOPS; ISOC; Ken Fairchild; Ken Fairchild; Lockwood, Robert; Michelle Reno; Nigel Angold; Paul Janzen; Perry, Timothy; Tyler, Ryan; Wesley, Sheral
Subject: IBEX Orbit# 368 ATS Approval (24 May 17 - 2 Jun 17)
Guys,
Here are the planning files and ATS for Orbit# 368.
Please respond to this email thread with your comments/approvals
Approvals are required before 13 May 17 @1800 UTC
Note the following:
1. Battery Balancing at PERIGEE
Orbit# 368 PERIGEE: Battery Balancing Commands
# 2017-06-02T22:26:55.394Z,Perigee,orbit:368
SetLongEclipseFlag TRUE $TIME=2017/06:02:23:00:00
SetLongEclipseFlag FALSE $TIME=2017/06:03:00:30:00
2. Moo in LO FOV Commands
# 2017-05-31T20:38:20.955Z,MoonInLoFovStart,orbit:368
# 2017-06-01T19:19:11.845Z,MoonInLoFovStop,orbit:368
3. APL-18 SSR_Dump/Tracking Contact
*IBEX,APL-18,ADD,06/02/17,153,19:00:00,06/02/17,153,20:00:00,,10_re Descending 2-320K IBEX-2 Orbit# 368 SSR_Dump/Tracking Contact
* This contact has not been confirmed by APL-18.
* Commands will be generated at a later date once confirmed
4. Command Load Constraint Violation Report
IBEX_2017_144_o0368a_v001.scr
==========================
HARD CONSTRAINT VIOLATIONS
==========================
NO VIOLATIONS.
==========================
SOFT CONSTRAINT VIOLATIONS
==========================
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2017/05/25 07:06:55 UTC
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2017/05/29 01:00:16 UTC
==============
OTHER MESSAGES
==============
NO MESSAGES.
Sheral R. Wesley
Sr Systems Engineer
IBEX Mission OPS
CRS/CYGNUS Mission Planning
Bldg. 2 Room 1337
Office (703) 406-5641
Cell (202) 236-0802