All,

    I approve the ATS for orbit #363

        Tim

 

From: Wesley, Sheral
Sent: Tuesday, March 28, 2017 2:52 PM
To: Wesley, Sheral <Sheral.Wesley@OrbitalATK.com>; David Heirtzler <dheirtzl@atlas.sr.unh.edu>; IBEX-FDG <IBEX.fdg@applieddefense.com>; IBEXOPS <IBEXOPS@gmail.com>; ISOC <isocops@lists.sr.unh.edu>; Ken Fairchild <fair-play@comcast.net>; Ken Fairchild <kwfairchild@gmail.com>; Lockwood, Robert <Robert.Lockwood@OrbitalATK.com>; Michelle Reno <mreno@swri.edu>; Nigel Angold <nigel.angold@nasa.gov>; Paul Janzen <paul.janzen@umontana.edu>; Perry, Timothy <Timothy.Perry@OrbitalATK.com>; Tyler, Ryan <Ryan.Tyler@OrbitalATK.com>
Subject: IBEX ORbit# 363 ATS (10 Apr 17 - 19 Apr 17)

 

Guys,

Here are the planning files and ATS for Orbit# 363.

Please respond to this email thread with your comments and approvals

Approvals are required before 31 Mar @1200 UTC

 

Note the following:

1.       APL-18 SSR_Dump Contact for Orbit# 362

SetRelay stx,on $TIME=2017/04:11:00:58:00

SetDownlink2K $TIME=2017/04:11:00:58:02

SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2017/04:11:00:58:04

SetBilevelOutputControlReg COHERENT,ON $TIME=2017/04:11:00:58:06

SetDownlink320K $TIME=2017/04:11:01:05:00

SSR_DUMP_NEW $TIME=2017/04:11:01:10:00

SetRelay stx,off $TIME=2017/04:11:02:02:00  

 

2.       Apogee Sun Maneuver

2017-04-14T23:36:55.000Z,SunMvrBegin,orbit:363

2017-04-14T23:37:27.783Z,Apogee,orbit:363

2017-04-14T23:51:55.000Z,SunMvrEnd,orbit:363

 

3.       Command Load Constraint Violation Report

IBEX_2017_100_o0363a_v001.scr

 

==========================

HARD CONSTRAINT VIOLATIONS

==========================

NO VIOLATIONS.

 

==========================

SOFT CONSTRAINT VIOLATIONS

==========================

IBX-CLC-006: Planned transmission at 2017/04/19 07:58:00 UTC - 2017/04/19

             09:02:00 UTC is followed by one or more additional transmissions

             which, when combined, exceed the maximum transmission time of 5400

             seconds within a 18000-second window (total planned transmission

             time this window is 7680.000 seconds)

IBX-CLC-006: Planned transmission at 2017/04/19 12:58:00 UTC - 2017/04/19

             14:02:00 UTC is preceded by one or more additional transmissions

             which, when combined, exceed the maximum transmission time of 5400

             seconds within a 18000-second window (total planned transmission

             time this window is 7680.000 seconds)

IBX-CLC-016: No command to enable spin pulse protection was found after

             transition to science mode at 2017/04/10 23:00:01 UTC

IBX-CLC-016: No command to enable spin pulse protection was found after

             transition to science mode at 2017/04/15 00:52:01 UTC

 

==============

OTHER MESSAGES

==============

NO MESSAGES.

 

 

Sheral  R. Wesley

Sr Systems Engineer

IBEX Mission OPS

CRS/CYGNUS Mission Planning

Bldg. 2   Room 1337

Office (703) 406-5641

Cell (202) 236-0802

cid:image001.jpg@01D04F6C.5A1C97F0

 



Notice: This e-mail is intended solely for use of the individual or entity to which it is addressed and may contain information that is proprietary, privileged and/or exempt from disclosure under applicable law. If the reader is not the intended recipient or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. This communication may also contain data subject to U.S. export laws. If so, data subject to the International Traffic in Arms Regulation cannot be disseminated, distributed, transferred, or copied, whether incorporated or in its original form, to foreign nationals residing in the U.S. or abroad, absent the express prior approval of the U.S. Department of State. Data subject to the Export Administration Act may not be disseminated, distributed, transferred or copied contrary to U. S. Department of Commerce regulations. If you have received this communication in error, please notify the sender by reply e-mail and destroy the e-mail message and any physical copies made of the communication.
 Thank you. 
*********************