I approve IBEX_2016_156_o0329a_v001.scr

 

--
Chelle Reno
IBEX Mission Operations Manager
Juno/JADE Deputy Project Manager
Austin Mission Consulting
(210) 478-7337

From: Wesley.Sheral [sheral.wesley@orbitalatk.com]
Sent: Tuesday, May 24, 2016 6:43 PM
To: David Heirtzler; IBEX-FDG; IBEXOPS; ISOC; Ken Fairchild; Lockwood.Robert; Reno, Michelle; Nigel Angold; Paul Janzen; Perry.Tim; Tyler.Ryan; Wesley.Sheral
Subject: IBEX ORbit# 329 ATS Approval (4 June 16 - 14 June 16)

Guys,

Here are the planning files and ATS for Orbit# 329.

Please respond to this email thread with your comments/questions and approvals.

Approvals are required before 26 May 16 @1200 UTC

 

Note the following:

1.       New IBEX Rote Change : % valid thresholds after inertial maneuver

% valid command is now: ACT_SetKFInputSelect STA_PCT_VALID,43,28,33,48

 

2.       No ACT_SetSpinPulseProtectEnable commands

3.       No Battery Balancing Commands

4.       Moon in Lo FOV Commands

2016-06-11T23:13:15.986Z,MoonInLoFovStart,orbit:329

2016-06-12T22:58:19.195Z,MoonInLoFovStop,orbit:329

 

5.       Command Load Constraint Violation Report

IBEX_2016_156_o0329a_v001.scr

 

==========================

HARD CONSTRAINT VIOLATIONS

==========================

NO VIOLATIONS.

 

==========================

SOFT CONSTRAINT VIOLATIONS

==========================

IBX-CLC-006: Planned transmission at 2016/06/14 03:43:00 UTC - 2016/06/14

             05:17:00 UTC exceeds the maximum contiguous transmission time of

             5400 seconds

IBX-CLC-016: No command to enable spin pulse protection was found after

             transition to science mode at 2016/06/05 08:45:16 UTC

IBX-CLC-016: No command to enable spin pulse protection was found after

             transition to science mode at 2016/06/09 06:54:03 UTC

 

==============

OTHER MESSAGES

==============

NO MESSAGES.

 

 

 

Sheral  R. Wesley

IBEX Mission OPS

CRS/CYGNUS Mission Planning

Bldg. 2   Room 1337

Office (703) 406-5641

Cell (202) 236-0802

cid:image001.jpg@01D04F6C.5A1C97F0