I just want to do it every X orbits. Right now that X is 3 orbits. After the ST is stable, we can reassess.
#orb
year/haso start
apogee
haso end
perigee
Significant Events
Batt Bal
SSR
PTRs
UP
319
2016/03:05:12:41
03:09:13:24
03:13:15:37
03:14:01:43
ISN
Normal Lo Table Load (contact end of arc b): Steps 12345678
Reset SSR Pointers after dump
Y
Y
UP
320
2016/03:14:11:48
03:18:15:54
03:22:20:46
03:23:06:44
UP
321
2016/03:23:16:42
03:27:19:04
03:31:21:53
04:01:07:47
Y
UP
322
2016/04:01:17:42
04:05:20:17
04:10:00:15
04:10:09:42
Reset SSR Pointers
Y
Y
UP
323
2016/04:10:19:10
04:15:01:43
04:19:08:37
04:19:17:58
CLG
324
2016/04:20:03:19
04:24:08:13
04:28:12:33
04:28:22:06
BCR Processor Reset
Y
CP
325
2016/04:29:07:40
05:03:12:07
05:07:16:44
05:08:02:09
Y
Y
CP
326
2016/05:08:11:34
05:12:19:23
05:17:03:00
05:17:12:24
327
2016/05:17:21:47
05:22:04:01
05:26:08:37
05:26:18:29
Hi Gain test
Y
328
2016/05:27:04:21
05:31:09:00
06:04:13:01
06:04:22:58
Y
Y
In version 3 please include the SSR Pointer Reset commands as well :
# Orbit# 326 PERIGEE: APL-18 SSR_Dump/Tracking Contact
@ECT_SetRelay stx,on $TIME=2016/05:17:20:58:00
@FMI_SetDownlink2K $TIME=2016/05:17:20:58:02
@FMI_SetBilevelOutputControlReg STXMODE_Strobe,ON $TIME=2016/05:17:20:58:04
@FMI_SetBilevelOutputControlReg COHERENT,ON $TIME=2016/05:17:20:58:06
@FMI_SetDownlink320K $TIME=2016/05:17:21:05:00
@CEU_SSR_DUMP_NEW $TIME=2016/05:17:21:10:00
@CEU_SSR_SET_WRT_PTR 6500 $TIME=2016/05:17:21:10:02
@CEU_SSR_SET_RD_PTR 6500 $TIME=2016/05:17:21:10:04
@ECT_SetRelay stx,off $TIME=2016/05:17:22:02:00
Can we get a version 3 with the corrected times?
@CEU_SSR_DUMP_NEW $TIME=2016/05:17:21:10:00
@ECT_SetRelay stx,off $TIME=2016/05:17:20:02:00
From: Wesley.Sheral
Sent: Wednesday, April 27, 2016 9:13 AM
To: Wesley.Sheral; David Heirtzler; IBEX-FDG; IBEXOPS; ISOC; Ken Fairchild; Lockwood.Robert; Michelle Reno; Nigel Angold; Paul Janzen; Perry.Tim; Tyler.Ryan
Subject: IBEX Orbit# 326 ATS Approval v002 (8 May 16 - 17 May 16)
Guys,
Here is v002 of the ATS for approval.
The APL contact times were corrected
Sheral R. Wesley
IBEX Mission OPS
CRS/CYGNUS Mission Planning
Bldg. 2 Room 1337
Office (703) 406-5641
Cell (202) 236-0802
From: Wesley.Sheral
Sent: Tuesday, April 26, 2016 3:26 AM
To: David Heirtzler; IBEX-FDG; IBEXOPS; ISOC; Ken Fairchild; Lockwood.Robert; Michelle Reno; Nigel Angold; Paul Janzen; Perry.Tim; Tyler.Ryan; Wesley.Sheral
Subject: IBEX Orbit# 326 ATS Approval (8 May 16 - 17 May 16)
Guys,
Here are the planning files and ATS for Orbit# 326.
Please respond to this email thread with your comments, and approvals
Approvals are required before 28 Apr 16 @1100 UTC.
Note the following:
1. No Battery Balancing commands
2. APL-18 SSR_Dump commands were manually inserted because they straddled the 14re ASC crossing time
3. Moon in Lo FOV Commands
2016-05-13T11:33:24.289Z,MoonInLoFovStart,orbit:326
2016-05-14T17:39:40.942Z,MoonInLoFovStop,orbit:326
4. No Ascending SetSpinPulseProtectEnable Enable Commands
5. Command Load Constraint Violation Report
IBEX_2016_129_o0326a_Recovery_v001.scr
==========================
HARD CONSTRAINT VIOLATIONS
==========================
NO VIOLATIONS.
==========================
SOFT CONSTRAINT VIOLATIONS
==========================
IBX-CLC-006: Planned transmission at 2016/05/17 04:28:00 UTC - 2016/05/17
06:02:00 UTC exceeds the maximum contiguous transmission time of
5400 seconds
*IBEX,AUWA01,ADD,05/17/16,138,04:30:00,05/17/16,138,06:00:00,,LAHO 64K IBEX Orbit# 326 Tracking Contact
* CSS and CEU Spin Period Contact
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2016/05/08 11:34:23 UTC
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2016/05/12 20:35:16 UTC
==============
OTHER MESSAGES
==============
NO MESSAGES.
Sheral R. Wesley
IBEX Mission OPS
CRS/CYGNUS Mission Planning
Bldg. 2 Room 1337
Office (703) 406-5641
Cell (202) 236-0802