Guys,
Here is v002 of the ATS.
Note the following changes
1.
Battery Balancing time
2.
No SSR_Dump/Tracking Contact commands
I have scheduled this contact as a Blind_acq which will allow us to turn on the transmitter earlier and have more SSR_Download time
If the star tracker is not fixed by perigee of Orbit# 324, this contact will be extended 30 minutes
Sheral R. Wesley
IBEX Mission OPS
CRS/CYGNUS Mission Planning
Bldg. 2 Room 1337
Office (703) 406-5641
Cell (202) 236-0802
From: Wesley.Sheral
Sent: Friday, April 15, 2016 1:55 PM
To: David Heirtzler; IBEX-FDG; IBEXOPS; ISOC; Ken Fairchild; Lockwood.Robert; Michelle Reno; Nigel Angold; Paul Janzen; Perry.Tim; Tyler.Ryan; Wesley.Sheral
Subject: IBEX Orbit# 325 ATS Approval (28 Apr 16 - 8 May 16)
Guys,
Here are the planning files and ATS for Orbit# 325.
Please respond to this email thread with your comments and approvals
Approvals are required before 18 Apr 16 @1700 UTC
Note the following:
1.
No Ascending BUS command for SetSpinPulseProtectEnable Enable
2.
Apogee and Perigee Sun Maneuvers
3.
Perigee Battery Balancing Commands
Orbit# 325 PERIGEE: Battery Balancing Commands
# 2016-05-08T02:08:39.614Z,Perigee,orbit:325
SetLongEclipseFlag TRUE $TIME=2016/05:08:01:00:00
SetLongEclipseFlag FALSE $TIME=2016/05:08:20:30:00
4.
Moon in Lo FOV Commands
# 2016-04-29T11:11:49.884Z,MoonInLoFovStart,orbit:325
# 2016-04-29T12:54:35.274Z,MoonInLoFovStop,orbit:325
5.
Command Load Constraint Violation Report
IBEX_2016_119_o0325a_Recovery_v001.scr
==========================
HARD CONSTRAINT VIOLATIONS
==========================
NO VIOLATIONS.
==========================
SOFT CONSTRAINT VIOLATIONS
==========================
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2016/04/29 07:44:07 UTC
IBX-CLC-016: No command to enable spin pulse protection was found after
transition to science mode at 2016/05/03 13:23:45 UTC
==============
OTHER MESSAGES
==============
NO MESSAGES.
Sheral R. Wesley
IBEX Mission OPS
CRS/CYGNUS Mission Planning
Bldg. 2 Room 1337
Office (703) 406-5641
Cell (202) 236-0802